🚀 go-pugleaf

Hello Carl,

I think Bill has already answered your question :-

Bill wrote:

"
Basically, you turn on nat on the interface you wish use NAT on (this
must be a PPP interface, and you can only have it on one interface at a
time), e.g.

nat inet on
where "inet" is the interface, usually the interface to the internet.
"

The only other thing to do is to set the external address to 0.0.0.0

interface>address 0.0.0.0 inet        (where <inet> is your dialout i/f)

I was involved in the V3.4 LS beta programme with ITK-Intl which happened 
before the current organisational changes were put in motion.  I suggest 
you work with ITK-Intl (Boston), through your German distributor, to 
obtain a set of the three ROMs for the LS (the flash in the LS is just 
for patches and config storage).

You will also see a marked performance increase when you are running 
multilink PPP over ISDN with a very heavy traffic and you have the 
additional 4 Meg LS RAM simm installed.  V3.4 has a new memory management 
chunk of code that makes a huge difference when you use the expanded 
memory.


Best regards .... / Mark.



--- On Wed, 6 May 1998 23:46:57 +1000  "Carl K. Cunningham" 
<ccu@sbk-ks.de> wrote:
I just spoke with the german distributor, when I asked him if he can
deliver an upgrade to 3.4, all I got was a very puzzled "Huh?!" Is 3.4 
for the LS currently shipping, and if it's a beta, can you let me know 
where I can get it?


At 19:54 06.05.98 +1000, you wrote:
>
>Hello NB-Users,
>
>I have just been reading the NAT questions and thought I would comment 
on 
>how NAT in the LS performed for one of our customers at a recent 
>installation.
>
>The LS had a background ping task running and after power-up, dialled 
>into a Cisco 5260 (that was configged to accept ISDN and analogue 
calls). 
> The Cisco handed out a pooled IP address and the LS happily accepted 
it.

Carl K. Cunningham            ccu@sbk-ks.de
SBK Software + Systeme GmbH   Tel: (+49) 561 9899 754
Hollaendische Strasse 141     Fax: (+49) 561 85161
34127 Kassel                  http://www.sbk-ks.de
Germany

---------------End of Original Message-----------------

E-mail: mark.riley@opensystems.com.au
**** WE HAVE MOVED - PLEASE NOTE OUR NEW CONTACT DETAILS ****
Open Systems Pty. Ltd.
Churchill House
218 Northbourne Avenue
Braddon   A.C.T.   2612
Australia
International:-
PH +61-2-6261-4900 Fax +61-2-6257-9800
National:
PH(02)6261-4900 Fax(02)6257 9800

Website: http://www.opensystems.com.au