Re: Timeouts

Thread View: a2i.lists.netblazer-users

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Stuart Pierce Thu, 07 May 1998 00:00

#42

Author: Stuart Pierce
Date: Thu, 07 May 1998 00:00

75 lines
2975 bytes

Here's a list of syn11, I did notice that the EOF flag was not there.


Line     Modem/Dvc  CharGrp    Use          Command    DeviceStatus
syn11    <<None>>   <<None>>   newlex       <<None>>  
<CTS,DCD,DSR,RTS,DTR>
Flags:  001d604f  
<DEBUG,CTS,DCD,DSR,NOLOGIN,NOAUTO,SYNC,NOAUTOID,DEDICATED,RTS,DTR>
DSR: ON        DCD: ON        CTS: ON       RTS: ON       DTR: ON
Speed: 56000    Flow control: none   Parity: none   Size: 8   Stop: 1
Login: OFF         PPP PAP: auto       PPP CHAP: auto
Autoconfigure: off     Callin: ON         Access: all
Modem command delay: 0.000 seconds    Login prompt delay: 0.250 seconds
Modem status delay (seconds): DCD=0.000     DSR=0.000     CTS=0.000
DTR off time: 3.000 seconds
Idle times (minutes): receive=125  transmit=6  (auto-reset=0 dtron)
Trace: ON        Callback monitor: OFF
IP address: 207.40.12.99
Terminal type: <<None>>        Rows: not set        Cols: not set
Process = syn11, Dial Protocol = Console, state = Conn-Term
last local party: none                  last remote party:
none                 

The trace output shows this:

08:22:27.98 newlex sent:
PPP: len  18    protocol: LCP
Configure-Request(4): ID=34 Len=14
LCP options: MRU(4) Magic-Number(6)
0000:  |.4........g?x.|
08:22:28.55 syn11 info: CARRIER OFF\r
CARRIER ON\r
08:22:29.00 syn11 info: CARRIER OFF\r
CARRIER ON\r
08:22:29.25 syn11 info: CARRIER OFF\r
CARRIER ON\r
08:22:30.97 newlex sent:
PPP: len  18    protocol: LCP
Configure-Request(4): ID=35 Len=14
LCP options: MRU(4) Magic-Number(6)
0000:  |.5........g?x.|
08:22:30.99 syn11 info: CARRIER OFF\r
08:22:31.00 syn11 info: CARRIER ON\r
08:22:31.01 syn11 info: CARRIER OFF\r
CARRIER ON\r
CARRIER OFF\r
CARRIER ON\r
08:22:31.02 syn11 info: CARRIER OFF\r
CARRIER ON\r
08:22:31.03 syn11 info: CARRIER OFF\r

......and so forth.

It's got to be a simple thing, I hope.

Adam Bisbe wrote:
> 
> Line Modem/Dvc CharGrp Use Command DeviceStatus
> 
> syn10 <<None>> <<None>> val-cug <<None>> <CTS,DCD,DSR,RTS,DTR>
> 
> (is autoconfigure off? for that line, speed set to 57?)
> you should have those flags.
> If you have them, do a:
> interface xxxx trace on
> start xxxxx
> look at the negotiation.
> 
> A 06:35 07/05/98 -0400, Stuart Pierce escribi�:
> snipped
>      both csu's are set to factory options and the timing is dds
>      we have cs,rd & td on.
> 
> Adam.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads