Re: Timeouts

Thread View: a2i.lists.netblazer-users

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Adam Bisbe Thu, 07 May 1998 00:00

#43

Author: Adam Bisbe
Date: Thu, 07 May 1998 00:00

28 lines
1706 bytes

A 08:20 07/05/98 -0400, Stuart Pierce escribi=F3:
>Here's a list of syn11, I did notice that the EOF flag was not there.
>
>
>Line     Modem/Dvc  CharGrp    Use          Command    DeviceStatus
>syn11    <<None>>   <<None>>   newlex       <<None>> =20
><CTS,DCD,DSR,RTS,DTR>
>Flags:  001d604f =20
><DEBUG,CTS,DCD,DSR,NOLOGIN,NOAUTO,SYNC,NOAUTOID,DEDICATED,RTS,DTR>
>DSR: ON        DCD: ON        CTS: ON       RTS: ON       DTR: ON
>Speed: 56000    Flow control: none   Parity: none   Size: 8   Stop: 1
>Login: OFF         PPP PAP: auto       PPP CHAP: auto
>Autoconfigure: off     Callin: ON         Access: all
>Modem command delay: 0.000 seconds    Login prompt delay: 0.250 seconds
>Modem status delay (seconds): DCD=3D0.000     DSR=3D0.000     CTS=3D0.000
>DTR off time: 3.000 seconds
>Idle times (minutes): receive=3D125  transmit=3D6  (auto-reset=3D0 dtron)
Idle should be 0. Why do you have idle time on that line?

>Trace: ON        Callback monitor: OFF
>IP address: 207.40.12.99
>Terminal type: <<None>>        Rows: not set        Cols: not set
>Process =3D syn11, Dial Protocol =3D Console, state =3D Conn-Term
state should be idle, not Conn-Term.


Adam.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads