Thread View: a2i.lists.netblazer-users
1 messages
1 total messages
Started by Adam Bisbe
Thu, 07 May 1998 00:00
Re: Timeouts
Author: Adam Bisbe
Date: Thu, 07 May 1998 00:00
Date: Thu, 07 May 1998 00:00
42 lines
2125 bytes
2125 bytes
A 11:33 07/05/98 -0400, Stuart Pierce escribi=F3:
>> NetBlazer. Regarding Adam's comment about "state=3D", it maybe just that=
the
>> state shows idle until it is working.
This is a line list of one of mine's, it is a Point to Point 64k.
I am arriving to the unit throught the sync line, so it is working.
=20
Line Modem/Dvc CharGrp Use Command DeviceStatus
=20
syn10 <<None>> <<None>> val-cug <<None>> <CTS,DCD,DSR,RTS,DTR>
=20
Flags: 001f604e
<CTS,DCD,DSR,NOLOGIN,NOAUTO,SYNC,NOAUTOID,EOF,DEDICATED,RTS,DTR>
=20
DSR: ON DCD: ON CTS: ON RTS: ON DTR: ON
=20
Speed: 64000 Flow control: none Parity: none Size: 8 Stop: 1
=20
Login: OFF PPP PAP: auto PPP CHAP: auto
=20
Autoconfigure: off Callin: ON Access: all
=20
Modem command delay: 0.000 seconds Login prompt delay: 0.250 seconds
=20
Modem status delay (seconds): DCD=3D0.000 DSR=3D0.000 CTS=3D0.000
=20
DTR off time: 3.000 seconds
=20
Idle times (minutes): receive=3D0 transmit=3D0 (auto-reset=3D0 dtron)
=20
Trace: OFF Callback monitor: OFF
=20
IP address: 172.20.150.99
=20
Terminal type: <<None>> Rows: not set Cols: not set
=20
Process =3D Event Manager, Dial Protocol =3D Console, state =3D Idle
=20
=20
Adam.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads