Thread View: a2i.lists.netblazer-users
1 messages
1 total messages
Started by Bill Webb
Fri, 08 May 1998 00:00
Re: Harddisk for 40i
Author: Bill Webb
Date: Fri, 08 May 1998 00:00
Date: Fri, 08 May 1998 00:00
23 lines
1541 bytes
1541 bytes
Kirk Yarina wrote: > > Has anyone tried an 3M/Imation LS-120 SuperDisk instead of a hard drive, > and in place of the standard floppy? From Imation's FAQ it looks like the > drive has both a floppy and IDE interface, and if the NetBlazer could do an > IDE boot this would look like an good solution. > > I suspect that asking it to emulate a floppy boot on a 120M LS-120 diskette > is too much to hope for. I tried it when trying various IDE disk devices. I found that it didn't really behave as a standard IDE device - I think its actually an ATAPI device. However, I did find that the Syquest EZ135 worked great, and the IOMEGA ZIP drive worked, but was slow. Besides, you really want to be able to use the floppy at the same time as the hard disk so that you can install new versions of the system etc. -- Bill Webb. Ex-NetBlazer guru; now working for Ascend Comm. Email: webb@frigate.com WWW: http://www.frigate.com/~webb -- above opinions are my own, not anyone else's.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads