Thread View: a2i.lists.netblazer-users
1 messages
1 total messages
Started by Bill Webb
Fri, 08 May 1998 00:00
Re: MicaBlazer
Author: Bill Webb
Date: Fri, 08 May 1998 00:00
Date: Fri, 08 May 1998 00:00
22 lines
1667 bytes
1667 bytes
Stuart Pierce wrote: > > It has happened that I would get Not enough Memory to start Console and > it wouldn't let anyone log on. On their end it usually says Dial-up > Networking could not negotiate a compatible set of networking protocols. > The only recourse was to reboot. The other night my mica's started to > report Modem Unavailable and Resources not available. The phone company > had to go in and busy out a trunk and then people started getting in. I > did a mica reset and all that jazz, I was about to reboot the whole > system but in the morning it mysteriously cleared up. I'm thinking that > there wasn't enough memory or something and that was another reason to > get more memory. Do a "mem" and see if there were any allocation failures. If there were then you probably could do with more memory. If you didn't have any allocation failures then it must be something else. -- Bill Webb. Ex-NetBlazer guru; now working for Ascend Comm. Email: webb@frigate.com WWW: http://www.frigate.com/~webb -- above opinions are my own, not anyone else's.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads