🚀 go-pugleaf

On Mon, 19 May 1997, Patrick Kong wrote:

> what's this wrote:
> > 
> > Eric Lin wrote:
> > x
> > x   ACCO Computer  --  Your favorite computer supply source
> > x
> > x     12020 Bridgeport Rd.             Tel:   (604) 273-3316
> > x     Richmond, B.C. V6V 1J3           Fax:   (604) 270-0366
> > x     Canada                           Email: acco@tntcomputer.com
> > x
> > 
> > x -----------------------------------------------------------------
> > x   All Mainboards with 512K Pipelined Burst Cache, Support 75-200, MMX
> > x
> > x ABIT IT5H HX SoftMenu, 83MHz,SDRAM    $199
> > 
> > The HX chipset does not support SDRAM....the board has 2 dimm slots, not
> > for SDRAM though check the specs at
> > http://www.abit.com.tw/html/it5h.htm
> 
> It says:
> Memory (DRAM) 
> 1.Two 168-pin DIMM sockets for 3.3V unbuffered
>   DRAM modules 
> 2.Four 72-pin SIMM sockets 
> 3.DIMM and SIMM sockets support EDO and FP
>   DRAM 
> 4.Supports ECC memory function
> 
> Does it mean it support or not support SDRAM???
> 
> Patrick Kong
> 
> 

DIMM doesn't mean SDRAM. Both EDO and SDRAM can be used in DIMM module, 
but HX chipset does not support SDRAM. So only FP/EDO DIMM can be use in
ABIT IT5H. ECC is for error correction. If you are going to use SDRAM, get
a new TX motheboard which has better SDRAM support and Ultra 33, but
cannot cache more than 64M ram.

Boris