🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: adobe.audition.windows
1 messages
1 total messages Started by OldGold Sun, 01 Feb 2009 16:53
FA: M AUDIO Omni Studio Delta 66 Near Mint Low Hours
#102
Author: OldGold
Date: Sun, 01 Feb 2009 16:53
63 lines
3879 bytes
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=41784&item=260354392681



M AUDIO Omni Studio Delta 66 Computer Interface


This is a superior interface which uses the Delta 66 soundcard married
to the Omni i/o desktop audio station.

Item is in near mint condition. Low hours. I am the original owner.
Includes original boxing, interface, delta 66 sound card, drivers,
cables, power supply, manual etc.

Pre amps are GREAT on this interface!


Features:

2 Mic/Inst and 2 line level balanced/unbalanced analog inputs to the
Delta 44 or Delta 66 soundcard.
2 Mic/Inst inputs equipped with XLR phantom power, insert I/O jacks,
individual gain controls, gain reduction "pad" switch, and signal/clip
indicator LEDs.
Low impedance mic inputs provide 66dB of gain and utilize M Audio's
critically acclaimed DMP2 pre-amp technology. They are switchable to
hi-impedance instrument inputs with 46dB of gain, ideal for electric/
acoustic guitars.
The Omni Mic/Inst pre-amp has a frequency response of 10Hz to 200kHz,
low THD of .0009%, with a dynamic range of 130dB.
Stereo effect return. Mixing Section (all balanced/unbalanced on TRS
jacks).
4 Delta outputs can simultaneously be used as independent balanced/
unbalanced direct outs for use as additional effects sends, alternate
mix output, or feeds to a secondary mixer.
4 stereo aux inputs for MIDI devices.
Stereo Aux inputs 1 and 2 can be muted in the mixer and re-routed to
the Delta line inputs for easy audio recording of MIDI instruments or
other auxiliary inputs.
Mix out for recording to a mix deck
Control room outs with independent level control for monitoring
2 headphone outputs with individual level controls
1 mono effect send per channel
L/R output signal/clip LEDs
Powerful digital mixing, routing, and monitoring capabilities with
included software
Technical Info:

Peak Analog Input Signal: +14dBu (+4dBu setting), +6dBV (Consumer
setting), 0dBV (-10dBV setting).
Peak Analog Output Signal: +14dBu (+4dBu setting), +6dBV (Consumer
setting), 0dBV (-10dBV setting)
Dynamic Range: Outputs: 103dB (a-weighted), Inputs: 99dB (a-weighted)
THD (at 0dBFS): Outputs: less than 0.0015%, Inputs: less than 0.0024%
Frequency Response: 22Hz - 22kHz, -0.3, -0.2dB
Input Impedance: 10k ohms minimum
Input Connectors: 1/4 in. female TRS-type, balanced or unbalanced
Output Connectors: 1/4 in. female TRS-type, balanced or unbalanced
Digital Input Format: S/PDIF coaxial, 0.5V to 5V peak-to-peak.
Digital Input Sample Rate: 8kHz to 96kHz.
Digital Output Format: S/PDIF coaxial, 0.5V peak-to-peak; AES/EBU data
stream over S/PDIF coaxial.
Digital Output Sample Rate: 8kHz to 96kHz.
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads