🚀 go-pugleaf

I see. Maybe 3.0 does not have USB support and your problem will be resolved
with 4.0. Good luck.

-- 

Cheers,
better known as McGrady's cousin

===========================
Vince Carter - Half Man, Half A Season.


"Eli Aran" <eli_yardena@hotmail.com> wrote in message
news:2lg61gFcd69hU1@uni-berlin.de...
> thank you for you reply.
> as I mentioned in my first post, I was only given two options to choose
from
> in the Palm Desktop installation: COM1 and COM3. I was not given a USB
> connection option to choose so I am not able to select the USB connection
> method in Hotsync in the task bar or in the cradle an the synchronization
> via the Hotsync app in the palm fails and stops.
>
> I accidentally looked at the version of the Palm Desktop application given
> to me in the package CD, and it turned out to be 3.0.something. I read in
> other newsgroup answers to my question that the version should be 4.0 or
4.1
> (but not 5.0)
>
> I am currently downloading Palm Desktop ver. 4.1 from www.download.com and
I
> am very hopeful that this will solve my non-existent USB option for
> communication with the hand held.
>
> Eli
>
> "better known as McGrady's cousin" <Armani@Giorgio.it> wrote in message
> news:BIAIc.7189$TB3.270332@news20.bellglobal.com...
> > Make sure you have HotSync manager loaded on your PC. Then right click
the
> > HotSync manager in your taskbar on your PC and make sure "Local USB" is
> > checked.
> >
> > Just leave COM1 selected because that is for your serial connection and
> > you're not using that.
> >
> > -- 
> >
> > Cheers,
> > better known as McGrady's cousin
> >
> > ===========================
> > Vince Carter - Half Man, Half A Season.
> >
> >
> > "Eli Aran" <eli_yardena@hotmail.com> wrote in message
> > news:2lg2pgFcicpjU1@uni-berlin.de...
> > >         I have winxp pro and my CPU/Ram are: p4 2.4GHz 256MB
> > >         I need a driver to support the USB connection from my palm
hand
> > held
> > > to my pc.
> > >         the Hotsync app provided by the Palm CD only offers me to
choose
> > > between COM1 and COM3. no USB option to select.
> > >         the  Palm web site support told me to log into windows as
> > > administrator and re-install the Palm Desktop program again from the
CD
> > but
> > > did not provide the USB option to choose either.
> > >         I connect the USB cable from the cradle to a USB slot in my pc
> and
> > > press the synchronization button on the cradle or select the Hotsync
> > program
> > > in it. if device manager is open I can see suddenly a new "unknown USB
> > > device" in the hardware list with code 28 in its properties. this
device
> > > disappears with its yellow question mark immediately after the
> > > synchronization fails and stops.
> > >         I need a USB driver for the palm m515 I have, because so-far I
> can
> > > only use it as stand alone or to recharge the battery - no
> synchronization
> > > or installation possible in it.
> > > note: all the USB devices are working well in the device manager list.
> > > (is it possible that the palm cradle USB connection cable is
physically
> > > damaged?)
> > >         thank you
> > >
> > >
> > >
> > >
> > >
> > > ---
> > > Outgoing mail is certified Virus Free.
> > > Checked by AVG anti-virus system (http://www.grisoft.com).
> > > Version: 6.0.718 / Virus Database: 474 - Release Date: 09-Jul-04
> > >
> > >
> >
> >
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.718 / Virus Database: 474 - Release Date: 09-Jul-04
>
>