🚀 go-pugleaf

short answer... yes

long answer...
linux caedmgr[411]: modpath = /lib/modules/2.4.19-4gb
linux cardmgr[411]: modsubdir = pcmcia
linux cardmgr[411]: watching 2 sockets

....

linux cardmgr[411]: exiting
linux kernel: unloading kernel card services

....

linuxrcpcmcia: /sbin/insmod
/lib/modules/2.4.19-4gb/kernel/drivers/pcmcia/pcmcia_core.o
linux kernel: linux kernel card services 3.1.22
linux kernel:   opyions:   [pci] [cardbus] [pm]
linuxrcpcmcia: /sbin/insmod
/lib/modules/2.4.19-4gb/kernel/drivers/pcmcia/pcmcia_core.o
linuxrcpcmcia: /sbin/insmod
/lib/modules/2.4.19-4gb/kernel/drivers/pcmcia/yenta_socket.o

.... a few mentions of yenta irq's ....

linux cardmgr[520]: socket 1: Belkin-5020
linux kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
linux cardmgr[520]: module /lib/modules/2.4.19-4GB//pcmcia/net/8390.o not
available
linux cardmgr[520]: executing: 'modprobe -v 8390'
linux cardmgr[520]: + /sbin/insmod
/lib/modules/2.4.19-4GB/kernel/drivers/net/8390.o
cardmgr[520]: + Using /lib/modules/2.4.19-4GB/kernel/drivers/net/8390.o
linux cardmgr[520]: + Symbol version prefix ''
linux cardmgr[520]: executing: 'insmod -v
/lib/modules/2.4.19-4GB//pcmcia/pcnet_cs.o'
linux cardmgr[520]: + Using /lib/modules/2.4.19-4GB//pcmcia/pcnet_cs.o
linux cardmgr[520]: + Symbol version prefix ''
linux kernel: eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr
00:30:BD:11:4A:3F
linux cardmgr[520]: executing: './network start eth0'
linux ifup: No configuration found for eth-pcmcia-1 eth0
linux /etc/hotplug/net.agent[1110]: Interface eth0 is handled by service
PCMCIA    ... exiting

is that any help??

"Bill Marcum" <bmarcum@iglou.com> wrote in message
news:3e8991a3_1@news.iglou.com...
> On Mon, 31 Mar 2003 15:22:06 +0100, Iain baker
>   <iain.baker1@ntlworld.com> wrote:
> > Hi,
> > i have SuSE 8.1 and i have purchased a PCMCIA Notebook Network Card from
> > bilkin (F5D5020)... the box doesnt mention linux compatability (but does
> > claim to be windows compatable) once i'd put the cd in it told me i
could
> > use it in linux with the addition of a simple line of text that SuSE
already
> > contained... bonus right?? wrong... it doesnt seem to know the cards
> > connected  :(
> >
> That card works for me in Debian 3.0.  Are there any lines about PCMCIA in
> /var/log/messages?
>