🚀 go-pugleaf

If you could refrain to post to that many newsgroups ...

As long as you're figuring out how the AT commands work,
you should use a PC. And when they work, think about a PIC.

Rene
-- 
Ing.Buero R.Tschaggelar - http://www.ibrtses.com
& commercial newsgroups - http://www.talkto.net


rockies wrote:
> if I have written a program with Nokie AT command set ( they are mainly
> phone # to deposit the data,SMS, speed....etc), are they written and store
> in
> 
> a. the PIC (found inside  the DLR-3 circuit board)?? make use the
> cable-making according to
> http://www.atrox.at/datacable/dlr3/index.html
> 
> b. or can "AT command set" be written in a ASM and store in 8052 chip ???
> 
> still reading the AT command set and trying  to figure what is going on?

still cannot figure out.  Two areas have the PIC ( programmanle chips)

A. in the circuit board connect the DLR-3
B. in the 8052 circuit board (SBC).


MAKE a clear direct statement, else I do not understand your english.

those newsgroup are assoicated with this topic. People will help me out.



Rene Tschaggelar <tschaggelar@dplanet.ch> wrote in message
news:3DC4040B.2010507@dplanet.ch...
> If you could refrain to post to that many newsgroups ...
>
> As long as you're figuring out how the AT commands work,
> you should use a PC. And when they work, think about a PIC.
>
> Rene
> --
> Ing.Buero R.Tschaggelar - http://www.ibrtses.com
> & commercial newsgroups - http://www.talkto.net
>
>
> rockies wrote:
> > if I have written a program with Nokie AT command set ( they are mainly
> > phone # to deposit the data,SMS, speed....etc), are they written and
store
> > in
> >
> > a. the PIC (found inside  the DLR-3 circuit board)?? make use the
> > cable-making according to
> > http://www.atrox.at/datacable/dlr3/index.html
> >
> > b. or can "AT command set" be written in a ASM and store in 8052 chip
???
> >
> > still reading the AT command set and trying  to figure what is going on?
>

rockies wrote:
> can AT command be written in 8051 chip?


> I do not have 6210 Nokie to test any thing. I have  send a SMS before.
> Brian Goldsmith <brian.goldsmith@nospamecho1.com.au> wrote in message
> news:T36x9.5360$5u4.17939@news-server.bigpond.net.au...
> 
>>"Grant Edwards" <grante@visi.com> wrote
>>
>>
>>>I have read the Nokie   I am very
>>>sure the nokie works .
>>
>>Oh for Pete's sake.  It's Nokia
>>
>>
>> please englighten me !!!!!!!!!!!!
>>
>>
>>*******Hey Grant, maybe he left an "O" out of Nokie,now that would
> 
> enlighten
> 
>>him.    :-)      Brian Goldsmith.
>>
>>
>>
>>
> 
> 
> 

YES!!!  AT commands must be sent as ASCII coded strings to the modem. 
If your chip has an internal SCI, then simply write a routine to send 
the string (followed by CR,LF).  Without an internal SCI, you must use 
an external UART to send serial data to the serial level shifter.


Perhaps you should consider going to school, or reading a book on 
micros.  (Learn to swim before diving into the deep end)

jt

I triied to reply to his email (re PIC & Nokia SMS) - and it bounced, so I'm
beginning to think he's putting on the fake English - to be a bit of a
troll..  He certainly hasn't been responding to this thread


"Grant Edwards" <grante@visi.com> wrote in message
news:slrnas6pjl.vn3.grante@localhost.localdomain...
> In article <aq2cio$81c1@imsp212.netvigator.com>, rockies wrote:
>
> > I have read the Nokie 6210 - data & fax commuunication page 97-99, I am
very
> > sure the nokie works like a modem.
>
> Oh for Pete's sake.  It's Nokia
>                               ^
>
> > please englighten me !!!!!!!!!!!!
>
> I would try, but I haven't been able to figure out what you're asking.
>
> --
> Grant Edwards                   grante             Yow!  .. I have a
>                                   at               VISION! It's a RANCID
>                                visi.com            double-FISHWICH on an
>                                                    ENRICHED BUN!!

"Jason Tang" wrote:

> YES!!!  AT commands must be sent as ASCII coded strings to the
> modem.  If your chip has an internal SCI, then simply write a
> routine to send the string (followed by CR,LF).

That should be <cr> (ASCII character 13 decimal) only, without a
<lf>.  Sorry to be pedantic, but with some modems and AT commands
this difference is absolutely critical.

AT commands are terminated with a single character, which is the
ASCII representation of the value stored in the modem's S3
register.  This is always 13 decimal by default.

John

> That should be <cr> (ASCII character 13 decimal) only, without a
> <lf>.  Sorry to be pedantic, but with some modems and AT commands
> this difference is absolutely critical.

If you want real fun, try to figure out what "reset to factory defaults"
means.

I found that 6210 is suitable for my project.
I am reading sms program which integrated with AT nokie command set.






news-server <news0602@tools2bcool.com> wrote in message
news:I8bx9.6060$5u4.20289@news-server.bigpond.net.au...
> I triied to reply to his email (re PIC & Nokia SMS) - and it bounced, so
I'm
> beginning to think he's putting on the fake English - to be a bit of a
> troll..  He certainly hasn't been responding to this thread
>
>
> "Grant Edwards" <grante@visi.com> wrote in message
> news:slrnas6pjl.vn3.grante@localhost.localdomain...
> > In article <aq2cio$81c1@imsp212.netvigator.com>, rockies wrote:
> >
> > > I have read the Nokie 6210 - data & fax commuunication page 97-99, I
am
> very
> > > sure the nokie works like a modem.
> >
> > Oh for Pete's sake.  It's Nokia
> >                               ^
> >
> > > please englighten me !!!!!!!!!!!!
> >
> > I would try, but I haven't been able to figure out what you're asking.
> >
> > --
> > Grant Edwards                   grante             Yow!  .. I have a
> >                                   at               VISION! It's a RANCID
> >                                visi.com            double-FISHWICH on an
> >                                                    ENRICHED BUN!!
>
>