🚀 go-pugleaf

"MameJunkie" <grimreaper@NOhotSPAMmail.com> wrote in message
news:l7s3qv87tmqen33elcc5883c50255cr46q@4ax.com...
> hey guys......
>
> I have a nokia 8250 and a data cable i purchased from circuit central
> http://www.circuitcentral.com.au/prod12.htm
>
> and am trying to connect my phone to my PC, the problem is
> i just cant get my pc to see the phone i have also tried to connect a
> 5110 with a fbus/mbus data cable i aquired from Tandy's  and also
> cannot get the PC to recognize a connection
>
> I have an Intel P4 and a D845EBG2 motherboard and am running Win XP
> and have tried nearly ALL software i can get my hands on, including
> Oxygen Phone Manager II
> Nokia PC Suite 5.1
> Logomanager
> Knok
> Rolis Tools (with and without Userport enabled)
> WinTelsa 6.03
> and various other progs found at enthusiast sites
>
>
> I have tried all different port configurations under the device
> manager for com1 and com2 changing irq setting ranges etc...
>
> still absolutely NOTHING
>
> Im sure its not the phone and i doubt respectible companies would be
> selling cables that didnt work.. so i guess its something else but the
> com port accepts my modem and works fine and nothing else i have tried
> or guides i have followed work. I dont have access to another PC to
> test phone/cables/software and am getting very frustrated..
>
> Is there anyone out there who could advise me or point me in the right
> direction as to whats going wrong and how i can remedy this, if you
> can it would be GREATLY APPRECIATED
>
> thanks !!

You will need a program called user port to tell XP to allow the programs
access to the com ports.

-- 
John C. Rymer
www.UnlockingIreland.com
UK, Ireland and worldwide phone unlocking.

On Fri, 31 Oct 2003 06:49:44 -0000, "John C. Rymer"
<unlockingireland@spamcop.net> wrote:

>You will need a program called user port to tell XP to allow the programs
>access to the com ports.

Thanks for your feedback John but i have already tried all the nokia
programs WITH and WITHOUT Tomas' Franzons USERPORT 1.0 enabled on the
com port ranges and still did not manage to achieve a sucessful
connection, any other suggestions ??

thanks =)