🚀 go-pugleaf

i think u need to enable nat translation
<jamesp010@hotmail.com> wrote in message 
news:1132713089.786255.141300@g44g2000cwa.googlegroups.com...
> Hi,
>
> I have a static IP address from my ISP. I also have a router with a
> built in Modem so I plug the router into the telephone line. If I make
> a direct connection from my router to my PC with the following
> addresses on my PC everything works fine, I get a connection to the
> internet (can view webpages):
>
> IP: 194.97.248.40
> Subnet: 255.255.255.250
> Default Gateway: 194.97.248.39
>
> Preferred DNS : 193.167.64.5
> Alternate DNS : 194.97.230.30
>
> As soon as I connect my Cisco 501 PIX in between the PC and the router,
> I don't get any internet connection. Here are the steps I am
> following to configure the firewall, so please guide me where I am
> going wrong:
>
> I start the PDM by going to https://192.168.1.1/startup.html
>
> Once started and authenticated get the Basic Configuration and I leave
> the default values ( PIX Host Name = pixfirewall, Domain Name:
> ciscopix.com)
>
> On the next page "Outside Interface Configuration" I leave the
> "Speed to Auto" and I select "static IP address" and input the
> following details IP 194.97.248.40, Subnet Mask: 255.255.255.250 and
> Default Gateway: 194.97.248.39
>
> On the next page I leave the remote VPN page empty
>
> On the next page I also leave the Auto update Configuration empty
>
> On the next page "Other Interfaces Configuration I can see the Inside
> and outside interface settings and the inside has a security level of
> 100 and the outside has 0.
>
> On the next page "NAT and PAT Configuration" I select "do not
> translate any addresses.
>
> On the next page I disable the DHCP because I can allocate a specific
> IP for the PC connecting to the Firewall.
>
> After applying all these setting and saving them. I specify TCP/IP for
> my PC with the following addresses:
>
> IP: 192.168.1.10
> Subnet Mask: 255.255.255.0
> Default Gateway : 192.168.1.1
>
> I try to connect to the internet but I will not let me connect. For
> some reason Skype is able to connect which is quite strange.
>
> Do I need to configure anything more? Why does it not allow me to
> connect to the internet?
>
> When I remove the firewall I am getting a connection. Please can you
> guide me?
>
> Thank you,
> James
>