2507 config question

Thread View: alt.certification.cisco

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by lance Sun, 29 Oct 2000 21:33

Author: lance
Date: Sun, 29 Oct 2000 21:33

56 lines
2013 bytes

First off, is anyone aware of another newsgroup
devoted to the Cisco IOS, which is more appropriate
to post configuration questions ?

Todays ?

I recently acquired a 2507 which has an intergrated
16 port hub.

I have yet to be able to configure/access the hub,
nor get as much as a link light.


Here's what I've done.


Configured e0 for 192.168.11.11 no shutdown
  I can see this is up via sh int e0


then,


R# config t


R(config)# hub ether e 0 1 16


R(config-hub)# no shutdown



That's basically where I'm at.



But when I do a  sh hub  it says that;


   port 1 of 16 is down, link state is down.

   same for every port, 1 - 16.


I've tried moving the cable through
about half the ports with no luck.


And what's the relationship between
interface  Ethernet 0  and the Hub ?


Thanks for any help,
Lance

Re: 2507 config question

Author: deor
Date: Tue, 31 Oct 2000 21:07

11 lines
1333 bytes

"lance" <lance@cityisp.net> wrote in message
news:4J0L5.14434$68.3941484@typhoon.tampabay.rr.com...
>
> First off, is anyone aware of another newsgroup
> devoted to the Cisco IOS, which is more appropriate
> to post configuration questions ?

comp.dcom.sys.cisco is the most likely (among the groups carried by my ISP)

Deor

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads