Connect incomming call to right dialer

Thread View: alt.certification.cisco

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by FD Thu, 28 Mar 2002 13:25

#45

Author: FD
Date: Thu, 28 Mar 2002 13:25

33 lines
2306 bytes

Hello,

We have 30 dialers configured in our Cisco 3600 router. We work with
dialer-pools. In each dialer there is a statement "dialer caller 12345" so
that when 12345 calls it connects to the right dialer. Now we have create
one dialer with no "dialer caller" defined. The idea is that when no dialer
has  the right dialer caller configured it connects to th dialer with no
dialer caller. We have 4 mobile users and they call from different locations
(Hotels).

The problem is that we get the message is "Incoming call rejected,
unbindable" How can I solve this problem.

Freddy

Here my normal dialer:
interface Dialer11
 description xxxxx
 ip unnumbered FastEthernet0/0
 no ip redirects
 no ip proxy-arp
 encapsulation ppp
 dialer pool 2
 dialer remote-name location
 dialer idle-timeout 60
 dialer enable-timeout 2
 dialer string 123456 class dial1
 dialer caller 123456
 dialer-group 1
 no cdp enable
 ppp callback accept
 ppp authentication chap pap callin
 ppp pap sent-username

Re: Connect incomming call to right dialer

#46

Author: Vincent Jones
Date: Fri, 29 Mar 2002 16:02

31 lines
2488 bytes

In article <3ca31a5f$0$13398$4d4ebb8e@read.news.nl.uu.net>,
FD <f.drogt@sze.nl> wrote:
>Hello,
>
>We have 30 dialers configured in our Cisco 3600 router. We work with
>dialer-pools. In each dialer there is a statement "dialer caller 12345" so
>that when 12345 calls it connects to the right dialer. Now we have create
>one dialer with no "dialer caller" defined. The idea is that when no dialer
>has  the right dialer caller configured it connects to th dialer with no
>dialer caller. We have 4 mobile users and they call from different locations
>(Hotels).
>
>The problem is that we get the message is "Incoming call rejected,
>unbindable" How can I solve this problem.
>
>Freddy

Two avenues you could explore (no guarantees on either...just ideas...)

1 - Define a virtual template and let them bind to that (dialers require
    an explicit match, virtual templates do not)

2 - Use PAP or CHAP to identify which dialer to bind to (but that may
    require modifying all your currently working callers...)

Good luck and have fun!
-- 
Vincent C Jones, Consultant           Expert advice and a helping hand
Networking Unlimited, Inc.            for those who want to manage and
Tenafly, NJ  Phone: 201 568-7810      control their networking destiny
http://www.networkingunlimited.com

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads