🚀 go-pugleaf

Running the same system.  My Celery runs with a 2.1V setting.  Be sure you
get a case that has good airflow though (I got a Inwin Q500, check it out
here: http://192.216.185.10/mwave/doc/q500.html )  I'm running a Banshee
Video Card and it can get quite toasty inside.  I bought some heat-sink for
the cpu which helped cool it about 1-2 degrees. I also got a fan to draw out
air, as well as the power supply fan that does the same.  My average
internal temp (BH6 Bios tells you this) averages around 90-100 degrees for
me.  I'm thinking about getting two more fans, another to draw out air and
one in the front to draw air in.   But go for it.


Nathan Emerson wrote in message <369cbc2f.0@news1.ibm.net>...
>I'm about to buy the parts for a 2nd system in order to practice
networking.
>I thought I'd check in with the experts before I take the plunge.  This is
>the plan:
>    300A Celeron--Overclocked to 450
>    Abit BH6 Mboard
>    64 100Sdram
>    Any ol' hard drive
>
>Any advice, before I start looking for the lowest price per part?
>
>Nate
>
>