Shiva Lanrover Rollover problems with Win 2000

Thread View: alt.comp.dcom.modems

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by eru100955 Fri, 28 Jun 2002 19:32

#84

Author: eru100955
Date: Fri, 28 Jun 2002 19:32

9 lines
1766 bytes

I have two Shiva Lanrover devices, each has 8 ports.  The Windows 2000
workstation clients have one com port configured with both the Shiva1 and
Shiva2 devices.  If  Shiva device 1 is full, when attempting to dial out, it
does not roll over to Shiva device 2.  It just stops with an error related
to unavailable ports.  Prior to W2k (Win 9x,NT), Shiva 1 would roll over to
Shiva 2, if Shiva 1 was full.  My only work around for this is to have the
users manually choose their Shiva devices, prior to dialing out.

Any helpful thoughts are appreciated.

Re: Shiva Lanrover Rollover problems with Win 2000

#85

Author: Reed
Date: Sat, 29 Jun 2002 02:53

18 lines
2222 bytes

eru100955 wrote:
> I have two Shiva Lanrover devices, each has 8 ports.  The Windows 2000
> workstation clients have one com port configured with both the Shiva1 and
> Shiva2 devices.  If  Shiva device 1 is full, when attempting to dial out, it
> does not roll over to Shiva device 2.  It just stops with an error related
> to unavailable ports.  Prior to W2k (Win 9x,NT), Shiva 1 would roll over to
> Shiva 2, if Shiva 1 was full.  My only work around for this is to have the
> users manually choose their Shiva devices, prior to dialing out.
> 
> Any helpful thoughts are appreciated.
> 
> 

It sounds like you have 2 groups of incoming phone lines, 1 for each LR. 
If so, is there a reason all 16 can't be in one telco hunt group, with 
one lead phone # ??

--Reed

Re: Shiva Lanrover Rollover problems with Win 2000

#86

Author: eru100955
Date: Mon, 01 Jul 2002 19:59

31 lines
2391 bytes

Thanks Reed,

All my lines are already in a hunt group.  Only two of my lines are inbound
the rest are all outbound only.  My rollover problems involve outbound
calls.  Anything else?

"Reed" <reedh@rmi.net> wrote in message news:3D1D2138.2000407@rmi.net...
> eru100955 wrote:
> > I have two Shiva Lanrover devices, each has 8 ports.  The Windows 2000
> > workstation clients have one com port configured with both the Shiva1
and
> > Shiva2 devices.  If  Shiva device 1 is full, when attempting to dial
out, it
> > does not roll over to Shiva device 2.  It just stops with an error
related
> > to unavailable ports.  Prior to W2k (Win 9x,NT), Shiva 1 would roll over
to
> > Shiva 2, if Shiva 1 was full.  My only work around for this is to have
the
> > users manually choose their Shiva devices, prior to dialing out.
> >
> > Any helpful thoughts are appreciated.
> >
> >
>
> It sounds like you have 2 groups of incoming phone lines, 1 for each LR.
> If so, is there a reason all 16 can't be in one telco hunt group, with
> one lead phone # ??
>
> --Reed
>

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads