🚀 go-pugleaf

Um...no, I'm afraid that's not how we do it in the Windows 2000 world.  If
you want to enable DMA on that drive in win2k here's how:

Get yourself to the device manager
Go to IDE ATA/ATAPI Controllers
Go to (Primary or Secondary) IDE Channel, or whichever channel the plextor
is hooked up to
Click on Advanced settings
Under the 2 boxes for transfer mode, choose DMA if available
You might want to do the same for the other channel anyway, just to allow
DMA
Restart, and come back to this to confirm that DMA is enabled.
burn baby burn

--
System Setup:
Lian Li PC-68 Case housing the following...
Intel Pentium III 700E @ 933 cC0 Stepping cooled by Alpha PAL35t (have gone
to 1 GHz too)
Asus CUSL2-C (and lemme tell you, this mobo ROCKS, but the Intel ATA drivers
suck)
256MB High Perf. Rev. 2 Mushkin RAM
IDE1 Master: Pioneer DVD-106S 16x DV / 40x CD UDMA66 Drive
IDE2 Master: Plextor PX1610A 16x10x40 CD-RW Drive
Promise Ultra100 UDMA100 controller:
Primary Channel Master - Western Digital WD400BB UDMA100 7200rpm 2MB Hard
Drive
Secondary Channel Master -  Quantum Fireball Plus LM 20.5GB UDMA66 7200RPM
2MB buffer Hard Drive
Hercules Prophet Geforce2 Pro 64MB hooked up to a Mitsubishi Diamond Plus 91
19" Monitor
Creative Soundblaster Live! Value hooked up to Altec Lansing ADA-885
THX-certified Speaker System
3Com 3C905C-TX-M Network Interface Card
Hauppauge WinTV-D Digital/Analog TV Tuner Card
"xXHAMMERGODXx" <hammergod@hotmail.com> wrote in message
news:4JAZ6.2778$lk5.562419@news20.bellglobal.com...
> Right Click "My Computer"
> Click Properties
> Click Device Manager
> Click + beside the CDROM icon
> Highlight PLEXTOR CD-R PX-W1610A
> Click Properties
> Click Settings
> Check the Box beside DMA
> Click OK
> Click OK
> DMA is now enabled
> Enjoy the sweet quickness and stability of the best CD R/W !!
>
> "Tige" <r.sundararajan@student.unsw.edu.au.newsgroups> wrote in message
> news:jHAZ6.157667$ff.1214628@news-server.bigpond.net.au...
> > Please reply to this message back on email after deleting the
.newsgroups,
> > as this is a multi-group posting.
> >
> > My System Specs:
> >
> > Windows 2000 SP2
> > A7V-133 Motherboard
> > 128 MB SD-RAM
> > Athlon 1Ghz CPU
> > Plextor 16/10/40A CD-ROM Drive.
> >
> >
> > Problem:
> > Plextor CD-ROM Drive which is supposed to read at 40X, only reads at
12X.
> > Someone asked me to enable
> > DMA, but when i look a the Properties in the Device Manager, a Resource
> > Section where i can do that isn't
> > enabled. Does anyone have a fix for this. Also, worth noting is that
> before
> > i installed the Plextor Manager software
> > the CD-ROM Drive was running at 8X. The Write CDR Function runs at 16X
> btw.
> >
> > Any help appreciated. (How to enable DMA, etc.)
> >
> > Thank you.
> >
> >
> >
>
>