🚀 go-pugleaf

On Sat, 06 Nov 2004 00:11:18 GMT, relloman@beasty.com
(rello) wrote:

>have a strange problem with an old aptiva
>specs are:
>win98, 128 meg ram, 4 gig HD k6 300cpu
>all works beautifully with the original CD reader
>ide setup is: ide 1 master = hd0 
>ide 1 slave = hd1
>ide 2  master = CD drive
>
>when i replace reader with a 52x ide CDRW it starts acting weird
>it won't boot ie startup screen doesnt appear
>so i disconnect ide 1 [slave hd1]
>it boots to a bios error
>PS2 pointing device not present - f1 to enter setup enter  to continue
>it then boots into windows but as soon as i put a cd in the drive the
>system hangs and after reset it hangs on a blank screen and refuse to
>boot
>
>after disconnecting various devices [cd burner or had disk etc] it
>will eventuall boot again but without mouse port....i reinstall
>original cd reader and it works fine.....
>i hve tried 2 [brand new] burners [LG and mitsubishi] with the same
>result...and yes the jumpers on the burners are set correctly
>
>weird thing is when i boot with the aptiva recovery cd in the burner
>and run image restore [using the format hd0 option] it runs the full
>restore  program and then  boots into windows...as soon as i put a cd
>in the drive it imediately hangs windows and refuse to boot again...
>never seen anything like this and have set up countless new burners in
>win98 machines and never seen anything like this before
>
>thanks for your comments
>
>relloman

you might try updating the motherboard bios if it's not
running the most current version.

A fast CD burner in an old box is usually a recipe for trouble.  If it
works, I find that you cannot burn at full speed.

I would try a BIOS update.  But knowing IBM, one probably doesn't exist.

-- 
----------------------------------------------------------------------------
------------------------------------------------------------
"It's all coming back to me now", said the blind man as he peed into the
wind
"rello" <relloman@beasty.com> wrote in message
news:418c1160.3340243@news-server...
> have a strange problem with an old aptiva
> specs are:
> win98, 128 meg ram, 4 gig HD k6 300cpu
> all works beautifully with the original CD reader
> ide setup is: ide 1 master = hd0
> ide 1 slave = hd1
> ide 2  master = CD drive
>
> when i replace reader with a 52x ide CDRW it starts acting weird
> it won't boot ie startup screen doesnt appear
> so i disconnect ide 1 [slave hd1]
> it boots to a bios error
> PS2 pointing device not present - f1 to enter setup enter  to continue
> it then boots into windows but as soon as i put a cd in the drive the
> system hangs and after reset it hangs on a blank screen and refuse to
> boot
>
> after disconnecting various devices [cd burner or had disk etc] it
> will eventuall boot again but without mouse port....i reinstall
> original cd reader and it works fine.....
> i hve tried 2 [brand new] burners [LG and mitsubishi] with the same
> result...and yes the jumpers on the burners are set correctly
>
> weird thing is when i boot with the aptiva recovery cd in the burner
> and run image restore [using the format hd0 option] it runs the full
> restore  program and then  boots into windows...as soon as i put a cd
> in the drive it imediately hangs windows and refuse to boot again...
> never seen anything like this and have set up countless new burners in
> win98 machines and never seen anything like this before
>
> thanks for your comments
>
> relloman

rello wrote:

> have a strange problem with an old aptiva
> specs are:
> win98, 128 meg ram, 4 gig HD k6 300cpu
> all works beautifully with the original CD reader
> ide setup is: ide 1 master = hd0 
> ide 1 slave = hd1
> ide 2  master = CD drive
> 
> when i replace reader with a 52x ide CDRW it starts acting weird
> it won't boot ie startup screen doesnt appear
> so i disconnect ide 1 [slave hd1]
> it boots to a bios error
> PS2 pointing device not present - f1 to enter setup enter  to continue
> it then boots into windows but as soon as i put a cd in the drive the
> system hangs and after reset it hangs on a blank screen and refuse to
> boot
> 
> after disconnecting various devices [cd burner or had disk etc] it
> will eventuall boot again but without mouse port....i reinstall
> original cd reader and it works fine.....
> i hve tried 2 [brand new] burners [LG and mitsubishi] with the same
> result...and yes the jumpers on the burners are set correctly
> 
> weird thing is when i boot with the aptiva recovery cd in the burner
> and run image restore [using the format hd0 option] it runs the full
> restore  program and then  boots into windows...as soon as i put a cd
> in the drive it imediately hangs windows and refuse to boot again...
> never seen anything like this and have set up countless new burners in
> win98 machines and never seen anything like this before
> 
> thanks for your comments
> 
> relloman
Better check the minimum requirements for the CD Burner.

On Sun, 14 Nov 2004 23:23:47 -0600, Last Boy Scout
<eggbtr@charter.net> wrote:

>rello wrote:
>
>> have a strange problem with an old aptiva
>> specs are:
>> win98, 128 meg ram, 4 gig HD k6 300cpu
>> all works beautifully with the original CD reader
>> ide setup is: ide 1 master = hd0 
>> ide 1 slave = hd1
>> ide 2  master = CD drive
>> 

>Better check the minimum requirements for the CD Burner.

Tpical "real" requirements are ATA33 support from
motherboard, a hard drive fast enough to support the burning
speed chosen (UDMA working for both drives), and not using
system for anything demanding enough to interfere,
particularly if it's a one-hdd system with apps, OS, etc,
all on same drive which is source for burnt files.
Otherwise there's no reason the burner shouldn't work on a
K6-2/300 box, most likely an issue not related to the specs
of the system else a buggy bios.