FS: Slot A Watercooling set and Northwind GFD 3.0 (Overclockers Hideout Waterblock)

Thread View: alt.comp.hardware.overclockers.amd

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Mike Hillyer Thu, 12 Apr 2001 19:08

Author: Mike Hillyer
Date: Thu, 12 Apr 2001 19:08

30 lines
2952 bytes

Hey All;

I have a Slot A Athlon watercooling set with GFD for sale on eBay, which I
thought I would see if anyone is interested in. The URL for the item is as
follows:

http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1229741602

The full kit consists of the following:
    Waterblock - made by Overclocker's Hideout, this unit is made of
adonised aluminum, so it will not rust. Hose     nipples use 3/8" ID hoses.
    Radiator - Customised heater core, lots of surface area for greating
cooling capacity! Comes with a 120mm fan for air flow. Input is 3/8" ID
hose, output is 1/2" ID hose. Output connector is swappable to 3/8" ID hose.
    Resevoir - 4" cube, uses a gasket rubber seal at cover, has input brass
nipple for 1/2" ID hose (matches output from radiator), with 3/8" ID brass
nipple for output from pump (Pump not included) with internal hose to attach
to pump with 1/2" ID pump (standard pumps will connect to the 1/2" ID hose
used inside the pump. Pump is not included as it is now in my next project.)
    Golden Fingers Device - Northwind Computers GFD 3.0

    Hoses and Clamps - This set includes all the hoses and clamps needed to
assemble your system in a full tower, all you need add is the pump and
processor!



Check it Out!

Mike

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads