🚀 go-pugleaf

the  blue end of the ide cable must be in the ide1 on MB, not the drive.

"minus200" <minus200@home.com> wrote in message
news:CzV55.18195$Yr4.348059@news1.rdc1.tn.home.com...
> is the black plug onthe IDE cable plugged into the master ?
>
>
> "Spook" <spook@asif.com> wrote in message
> news:BoV55.3788$qH.620446@pouncer.easynews.com...
> > Howdy Guys:
> >
> >     Slowly working through the installation of this
> board..Geeezzzzzzz..what
> > hassels...But as I'm on it now..talking to ya...I'm getting there :O)
> Anyway
> > my question is this... Installed a second HD and set to slave on IDE 1.
In
> > bios I set for autodetect... It's an Older Fat16 33 driven HD. Can't
> format
> > because it has data I need and can't remove..Any way Bios Sees it
> > "Everything right..Heads,Cyl,ect but as soon as I get to Windows front
> > screen at startup I get "BSOD...Blue Screen"
> >     Disable the drive in Bios and it boots fine..Grrrrrrrrrrr Any input
> guys
> > on what causes this?? And how i can fix it?   TIA Fellas :O)
> >
> >
> > Spook
> > KA7-100
> > 750 Athlon CPU
> > 128 Meg Mushkin Ram Rev2
> > Maxtor Diamondmax HD 7200  66
> > Maxtor HD 5200 33 <---slave drive thats the Prob
> > CLAP Geforce 256 Pro
> > FongKia Case w/300 watt Athlon Approved PS
> > SB X-Gamer--Bios Reports a Conflict with SB Emulation here..but no
> conflicts
> > show in Device Mang..... :O(
> > Win98SE
> >
> >
> >
>
>