🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: alt.comp.hardware.overclocking.amd
Article #266

Re: SBXgamer and KA7-100 MB Prob!!

#266
From: Grey
Date: Mon, 26 Jun 2000 00:00
59 lines
3041 bytes
The problem is more than likely with your highpoint controller and the
sblive conflicting... (they have a habit of this)

Start windows in safe mode (press f8 when booting as soon as it says
'starting windows 98')

Go to device manager (right click on my computer and choose properties)

Find the highpoint controller which will be under 'Scsi devices'  right
click on it and choose to disable it...

Now restart windows and it should work without a blue screen - if so then
gointo device manager again and look at the disabled highpoint device - and
look at its resources - they will more than likely have conflicting memory
ranges... set them up manually so that they are no longer conflicting...
re-enable the device and reboot.. you should no longer have the blue screen
problem...

If you find that it is not the highpoint device then you can do exactly the
same as above - but disable the sblive in safe mode - then check out the
resources it's using once you have rebooted to a normal windows session...


Hope that helps...

"Spook" <spook@noway.com> wrote in message
news:Vfx55.351$qH.43363@pouncer.easynews.com...
> Howdy gents:
>
>     Here's my problem: Installed an AbitKa7-100 board and SBLive Xgamer.
> When i install the software for the card everything goes fine. Then when
is
> asks to reboot, when Win98SE begins to load it starts to detect the new
> hardware and after it loads about 3 drivers.. BOOM..BSOD "Blue Screen of
> Death" every time. If i remove all the software and in Desktop Prop the
> hardware...reboot..Win98 will install default drivers for the card and
will
> boot to Windows with no probs... But i have none of the cards software
> O( Anyway to disable win98 looking for my card and drivers on the reboot??
>
> Sys:
> AbitKa7-100
> 128meg mushkin ram Rev2
> Diamondmax 20g 7200 HD
> CLAP Geforce256
> FongKai case with 300watt Athlon Approved PS
> Creative 56XCdrom
> Teac floppy
> 750 Athlon CPU
>
> Tryed different PCI slots,disable PNP ect...same same..Thanks for any
input
> guys :O)
>
>
>
>                                                                 Spook
>
>
Technical Details
Message-ID: <8ER55.1636$wB1.252401@news3.cableinet.net>
Path: arc1-ca.pugleaf.net!unknown!not-for-mail
References: <Vfx55.351$qH.43363@pouncer.easynews.com>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: faad6,4f894e373f35c9b3
X-Google-Attributes: gidfaad6,public
X-Google-Thread: 10e134,4f894e373f35c9b3
X-Google-Attributes: gid10e134,public
From: "Grey" <commongrey@hotmail.com>
Subject: Re: SBXgamer and KA7-100 MB Prob!!
Date: 2000/06/26
Message-ID: <8ER55.1636$wB1.252401@news3.cableinet.net>
X-Deja-AN: 639333108
References: <Vfx55.351$qH.43363@pouncer.easynews.com>
X-Priority: 3
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4029.2901
X-Complaints-To: abuse@cableinet.net
X-Trace: news3.cableinet.net 962061956 213.48.111.83 (Tue, 27 Jun 2000 00:25:56 BST)
Organization: Cable Internet (post doesn't reflect views of Cable Internet)
X-MSMail-Priority: Normal
NNTP-Posting-Date: Tue, 27 Jun 2000 00:25:56 BST
Newsgroups: alt.comp.hardware.overclocking.amd,creative.products.sound_blaster.live