Problems with K6-II 400 pse help

Thread View: alt.comp.hardware.overclocking.amd

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Timon Fri, 10 Dec 1999 00:00

#333

Author: Timon
Date: Fri, 10 Dec 1999 00:00

37 lines
2240 bytes


    Hello , I am new in this group .

    Perhaps my trouble will be an old one ,
but in this moment , I must ask for helping .

    I�ve just put a K6-II at 400 mhz ,
it�s the fourth processor in the same motherboard ,
but the first AMD , and I have a strange problems ,
only with this micro , continously hangs-up or resets ,
never more than 30 minutes rightly working , more ,
if the pc is recently on , it works more time that if it is
long time working , and it�s fan is the bigger I�ve
seen for this kind of chips ( it�s for a k6-III at 450 mhz !! )

    The motherboard is a Spacewalker , the bios is
an award 4.51 pg , the s.o is w98-se , I have reinstalled all the drivers
and all the software , I�ve emailed AMD , I�ve tried everything in the
parameters of the bios , I�ve asked in the seller , but nothing at all .

    The only strange thing I�ve seen , is that , the p.c. only goes fine
if I put the same bus of 66 or lower for all the parts , even to the micro ,
cause I must configure the system for work with 100 , but the memory
is a 72 pin type one , 64 mbs . So if I try working with 100 mhz for
the micro , x4 multiplier , and 66 mhz for the ram , it hangs , but if i try
all the sistem at 66 mhz or even at 75 mhz , all goes fine .

    The seller says me that is usual working with no-100 mhz memory
and with that speed for the micro , without problems .

    Ah , if I put it for working at 450 mhz , it goes fine ...
till it hangs up , just like at 400 mhz  !!

    It�s the only strange thing I�ve seen . Please , any idea ? Thanks

(answer me in the group , cause the email is not the true one )

Re: Problems with K6-II 400 pse help

#332

Author: Anthony Regina
Date: Thu, 09 Dec 1999 00:00

49 lines
2726 bytes

Sounds like the motherboard is not designed for that CPU. Try looking into
an ASUS motherboard.
"Timon" <Ypumba@teleline.es> wrote in message
news:82phre$2uv14@eui1nw.euskaltel.es...
>
>
>     Hello , I am new in this group .
>
>     Perhaps my trouble will be an old one ,
> but in this moment , I must ask for helping .
>
>     I�ve just put a K6-II at 400 mhz ,
> it�s the fourth processor in the same motherboard ,
> but the first AMD , and I have a strange problems ,
> only with this micro , continously hangs-up or resets ,
> never more than 30 minutes rightly working , more ,
> if the pc is recently on , it works more time that if it is
> long time working , and it�s fan is the bigger I�ve
> seen for this kind of chips ( it�s for a k6-III at 450 mhz !! )
>
>     The motherboard is a Spacewalker , the bios is
> an award 4.51 pg , the s.o is w98-se , I have reinstalled all the drivers
> and all the software , I�ve emailed AMD , I�ve tried everything in the
> parameters of the bios , I�ve asked in the seller , but nothing at all .
>
>     The only strange thing I�ve seen , is that , the p.c. only goes fine
> if I put the same bus of 66 or lower for all the parts , even to the micro
,
> cause I must configure the system for work with 100 , but the memory
> is a 72 pin type one , 64 mbs . So if I try working with 100 mhz for
> the micro , x4 multiplier , and 66 mhz for the ram , it hangs , but if i
try
> all the sistem at 66 mhz or even at 75 mhz , all goes fine .
>
>     The seller says me that is usual working with no-100 mhz memory
> and with that speed for the micro , without problems .
>
>     Ah , if I put it for working at 450 mhz , it goes fine ...
> till it hangs up , just like at 400 mhz  !!
>
>     It�s the only strange thing I�ve seen . Please , any idea ? Thanks
>
> (answer me in the group , cause the email is not the true one )
>
>
>
>
>
>

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads