🚀 go-pugleaf

Hi, the three bees mean that you have either a memory failure or conflict
with memory. I choose the later, please try to remove all 256k dips ic from
the socket may located as bank 0 /bank 1 including the parity check ic.
Then install the 4 1 meg. SIMMs and that will eliminate the confict between
the old rams and the SIMMs. Reboot and hopefully it eliminate the problems.
Good try.

Susan Cleeves <susan.cleeves @gbd.com> wrote in article
<5fteag$4j3@nr1.ottawa.istar.net>...
> I'm trying to upgrade the memory of an old 386SX. The original chips are
> 256k DIPs and I have replaced them with 4 1meg 30 pin SIMMs. I've changed
> all the appropriate switches etc., according to the manual but the
machine
> won't go. I get the 3 short beeps. I even tried changing the memory back
to
> the original setup but I'm still getting the 3 beeps. What do the beeps
> mean and how can I fix it?
> Any help would be appreciated.
> Susan
>