🚀 go-pugleaf

For a Pentium III 933 you would want a motherboard that has socket 370, slot
1 were used for PII and for some early 100MHz FSB PIII's.  I personally like
the VIA chipset, however the Intel 815 is the newest for Pentium.  As for
ram you are looking at 133 speed ram in the SDRAM format.  I am a fan of
ASUS motherboards, I am currently running a CUV4X without audio.
Unfortunately this board is no longer available except as an E model
(CUV4X-E).  This board has 133MHz Front Side Bus, and is ATA 100 compatible
for the newer HDD.  It also uses the VIA 694 (x I believe) chipset.  If you
want the 815 chipset I would reccomend a CUSL2 motherboard,
http://www.asus.com/ or something from Tyan, check their products here
http://www.tyan.com/, or even Soyo http://www.soyo.com/index_nof.htm.  Any
questions do not hesitate to email me directly by replying to sender.

Lars
Another to check might be MSI (Microstar) http://www.msi.com.tw/



"MT" <mtracy@mcmedia.com.au> wrote in message
news:99sbmp$2334$1@corolla.OntheNet.com.au...
> I'm looking at rebuilding a new system, and having been 4 years since my
> last build, I'm a bit out of date. I'm looking at getting a Pentium III
933
> but don't know which motherboard I should get. I'm assuming an Intel 815E
> chipset but I haven't found anywhere to tell me what sort of socket or
slot
> I need for the processor! Am I right in saying I could choose my processor
> to be either a Slot 1 or a socket 370? Which one is better and can anyone
> guide me toward a good motherboard. I'm not playing games with the system
> but do need it for sound and music recording, therefore it has to be a
> stable system. What sort of Memory would I be looking at too?
>
> Thanks in advance
>
> Matt
>
>