🚀 go-pugleaf

Ok, I've got the diagram
There is 25 VCC2 pins, (are they all the same ?)
and no clkmul0 pin but there is 1 CLK pin (is that the same ?)

>Pure 3D wrote in message ...
>>Is there a diagram of a mmx cpu (with the identification of the pins)
>>somewhere I could look at ?
>>
>>Brown Bear wrote in message...
>>>They are pins on the cpu, but they might be accessable through jumpers
>>>on the motherboard.
>>>
>>>>Pure 3D wrote in message...
>>>>
>>>>Could someone explain me what is "clkmul0" and "Vcc2" pins, and where
>they
>>>>are supposed to be on the motherboard ? Are they Jumpers pins or what ?
>>>>Thanks for the help...
>>>>
>>>>>Brown Bear wrote in message...
>>>>>The 1k ohm resistor has to be inserted between clkmul0 and Vcc2 pins,
>>>>>you have to figure out how to do this yourself on your motherboard.
>>>>>
>>>>>>Pure 3D wrote in message...
>>>>>>Could you please explain me more in details where do I put the 1K
>>resistor ?
>>>>>>
>>>>>>>Brown Bear wrote in message ...
>>>>>>>It has nothing to do with VX chipset.  Intel has changed the spec for
>>>>>>>MMX cpu.   With the revision 1 board, you can't get the chip to work
>>>>>>>at 3x muliplier.  The chip will still work on the motherboard but
only
>>>>>>>at 166MHz.  It is possible to modified the board by adding an 1k
>>>>>>>resistor to one of the pin to force it to pull high, so that you can
>>>>>>>get the 3x multiplier.
>>>>>>>
>>>>>>>>Pure 3D wrote in message ...
>>>>>>>>I would like to know if it's possible to use a 200 MMX processor on
a
>>>>>>>>586-ATV motherboard revision 1,
>>>>>>>>I heard there are some problems with VX chipsets and MMX processor
>>more then 166 MMX...
>>>>>>>>please help...
>>>>>>>>
>>>>>>>>and will there be other bios update for this card in the future ?
>>>>>>>>
>>>>>>>>Pure 3D
>>
>>
>>
>>
>
>