🚀 go-pugleaf

Followup -

you did get a manual with the board?

did you set the jumpers on the board as indicated?

also check out http://www.pcmech.com

                      Http://www.pcbuild.com



Mike Bishton <mjb@athenet.net> wrote in message
news:380A54F8.9C597077@athenet.net...
> How would i go about removing the keylock?  I found the two pins for it do
i
> need to close them with a jumper maybe?  there is a key on the front of
the
> case i got but when i connect it the board still doesn't boot.
>
> Mike
>
>
>
> "John M. Wisner" wrote:
>
> > when I had that problem it turned out that somehow I had accidently
locked
> > out the keyboard.
> >
> > Mike Bishton <mjb@athenet.net> wrote in message
> > news:38067B00.C4EEFA46@athenet.net...
> > > I bought a cheap pentium motherboard at a trade show a couple of weeks
> > > ago. I assembled a system with it. It Posts then displays "WAIT" and
> > > hangs.  I cannot enter the Setup utilility eithor.  I tested the CPU
in
> > > another computer and have tried differant RAM and power supplies.  Any
> > > Ideas?  It's a socket 7 w/ AMIBIOS.
> > >
>