🚀 go-pugleaf

Greetings gentlepeople,

We happen to have available an Intergraph CAD system with following 
specifications:

HARDWARE

InterPro 340 system
    32 bits workstation w/Intel 386  16 Mhz processor
    GX Graphics processor (512 colors from palette of 16.5 Million
    Unix C1000 Clipper Engine
    16 Mb RAM memory expandable to 80 Mb
    5�" 156 Mb hard disk
    RS-232 serial interface w/3 connection points
    parallel Centronics/Versatec compatible interface
    IEEE 802.3 (Ethernet)/XNS interface
    SCSI interface for hard disks/tape drives
    19" color monitor w/ resolution 1184 points*884 lines
    142 key keyboard, 3 button mouse
Tape unit 150 Mb cartridge
5�" 156 Mb hard disk (extra)
Single speed CD-Rom drive

HP Plotter 7600/240 E 
    Electrostatic, A 0 format
    Resolution 406 dpi
    Media breadth 914 mm; media width 896 mm
    Plotter speed 22 mm/sec (normal mode); 11 mm/sec high density mode
    Accuracy 0.025 mm; max. fault deviation 0.2%
    Plotter cable

SOFTWARE (original!)

Intergraph
    Microstation 32 (CD-Rom version 5.0)
        Stand-alone CAD package (based on Intergraph IGDS)
        VAX based IGDS capability
        2D/3D capability
        200+ data handling commands
        32 reference files for scaling, rotating etc.
        63 drawing layers/overlays per drawing 
        4 billion addressable colors
        complete manuals

Any serious bid will be considered. Please ask for 

Henk van Dijk (managing director) or
Patrick van der Reest (communications)
----
IBL Europe B.V.
Enschede, The Netherlands
Voice : +31-534341515
Fax   : +31-534341555
E-Mail: ibleurope@a1.nl