🚀 go-pugleaf

I don't know a lot about SCSI but there is one way to be sure whether the
NEC is a dud at DEA or not.  Rip a song or two to WAV onto your Hard drive
using your NEC as the reader (I don't know if Nero does this, if not, Media
Player 7 or Audiograbber will do the trick)

If the WAV file sounds staticcy like the CD's you've been burning, you may
be able to tweak the DAE process to get a decent sound otherwise you might
indeed have to give the NEC the flick.

Glen

"spamoff" <spamoff@hotmail.com> wrote in message
news:swHw6.5592$45.29932@newsfeeds.bigpond.com...
> Could it perhaps be something to do with the SCSI bus, cabling etc?
>
> Shane
>
> --
> Please replace "spamoff" with "snrcit" for personal replies.
> "Lee McC" <leemcc1@mindspring.com> wrote in message
> news:99tsti$rh5$1@nntp9.atl.mindspring.net...
> > Most likely, the NEC is bad at DAE.  You may try experimenting with
> > different media and different burn speeds - and that may clear up the
> > problem but in all likelihood, the NEC may need a flickin'.
> >
> > :o)
> >
> > "spamoff" <spamoff@hotmail.com> wrote in message
> > news:4vow6.5125$45.25991@newsfeeds.bigpond.com...
> > > Hi,
> > >
> > > When I copy a CD on the fly, the burnt CD plays back with a static
sound
> > in
> > > the background.
> > > The reader is a 40X SCSI NEC CD-3010A drive (configured as SCSI ID 2)
> and
> > > the CDR is a 6X24 Teac 56S (configured as SCSI ID 3).  Both devices
are
> > > connected to an Iwill 2936UWE SCSI adapter card.
> > >
> > > The SCSI termination is set on the CDROM reader (the NEC drive) and
the
> > > termination on the writer is set to 'off'.
> > > Both drives play original audio CDs without any distortion.  However,
> > > distortion occurs on both drives when I play a copied CD.
> > >
> > > This problem has only occurred since I added the NEC cdrom to my PC.
I
> > > previously had an IDE CDROM as the reader and recorded without any
> > problems
> > > to the Teac SCSI burner (+ Iwill adapter).
> > >
> > > Before giving the flick to the NEC drive and re-installing the
previous
> > IDE
> > > CDROM drive, what should I be looking at to rectify this problem?
> > >
> > > Thanks,
> > >
> > > Shane
> > >
> > > --
> > > Please replace "spamoff" with "snrcit" for personal replies.
> > >
> > >
> >
> >
>
>