🚀 go-pugleaf

Could it perhaps be something to do with the SCSI bus, cabling etc?

Shane

--
Please replace "spamoff" with "snrcit" for personal replies.
"Lee McC" <leemcc1@mindspring.com> wrote in message
news:99tsti$rh5$1@nntp9.atl.mindspring.net...
> Most likely, the NEC is bad at DAE.  You may try experimenting with
> different media and different burn speeds - and that may clear up the
> problem but in all likelihood, the NEC may need a flickin'.
>
> :o)
>
> "spamoff" <spamoff@hotmail.com> wrote in message
> news:4vow6.5125$45.25991@newsfeeds.bigpond.com...
> > Hi,
> >
> > When I copy a CD on the fly, the burnt CD plays back with a static sound
> in
> > the background.
> > The reader is a 40X SCSI NEC CD-3010A drive (configured as SCSI ID 2)
and
> > the CDR is a 6X24 Teac 56S (configured as SCSI ID 3).  Both devices are
> > connected to an Iwill 2936UWE SCSI adapter card.
> >
> > The SCSI termination is set on the CDROM reader (the NEC drive) and the
> > termination on the writer is set to 'off'.
> > Both drives play original audio CDs without any distortion.  However,
> > distortion occurs on both drives when I play a copied CD.
> >
> > This problem has only occurred since I added the NEC cdrom to my PC.  I
> > previously had an IDE CDROM as the reader and recorded without any
> problems
> > to the Teac SCSI burner (+ Iwill adapter).
> >
> > Before giving the flick to the NEC drive and re-installing the previous
> IDE
> > CDROM drive, what should I be looking at to rectify this problem?
> >
> > Thanks,
> >
> > Shane
> >
> > --
> > Please replace "spamoff" with "snrcit" for personal replies.
> >
> >
>
>