🚀 go-pugleaf

nmng@hotmail.com wrote:
> 
> Hello,
> I have a problem, hope somebody is kind enough to help me out.
> I have a Yamaha CDR-100 4x4 and I recently installed a HP Scanjet 5P.
> The Yamaha uses an Adaptec AIC-7850 scsi card and the HP uses a
> Symbios Logic 53C416 scsi card.
> 
> I don't know if they conflict or whatever, but whenever I try to
> open up EZCD Pro the error message comes up saying WNASPI32.DLL must
> be loaded and started.
> 
> The query: How do I achieve this?!
> 

A few things to think about:
- Why the two SCSI cards? - do you have a lot of other SCSI equipment
attatched to your machine?  SCSI devices are meant to be chainable, so
you should only need the one card and then form a SCSI chain with the
SCSI devices - put the CD writer nearest to the machine, because the
length of cable can be critical when writing at 4x.
- Have you ever got the CDR to work - ie was it working before you
installed a new card?
- What operating system have you got
- Have you checked the EZCD software documentation for information re
the ASPI problem - there should be something in there, because all CD
writer programs need ASPI stuff.

Try removing one card and see if the system works - it could be a SCSI
ID conflict that is stopping things from loading - Check to see if  you
get start up messages such as Yamaha CDR xxx found on SCSI ID 3? or do
you get error messages on start up - does your printer work? can you
read from the Yamaha CDR?

> Please reply via email rather than here, as I am unable to always
> connect
> to the news server.
> 
Here being where exactly?  You posted to quite a few newsgroups, not all
of which are relevant to this question.  I have trimmed some
non-relevant ones in my reply.

Phil
___________________________________
***Please remove the QQQ in my email address before replying***