🚀 go-pugleaf

This subject line made me think this was about domination and what not :)

Seriously though

Everyone I've talked to would suggest not to have two hd's one one channel.
I'm thinking of putting my burner on the ata66 tho, not because it will do
shit but just cuz..

Agent_C <fairnews@my-deja.com> wrote in message
news:8mcmtj$dse$1@nnrp1.deja.com...
> In article <lX%h5.23511$c5.65715@newsfeeds.bigpond.com>,
>   "Sunny" <bevtez@hotmail.com> wrote:
> > Thanks again, I have two hard drives so : looks like'
> > IDE-1  Hard Drive (Master)
> > IDE-1  Hard Drive (Slave)
> > IDE-2  CD-ROM  (Master)
> > IDE-2  CDR/RW  (Slave)  8x4x32
> > 11 months old Abit BX6 R2
>
> As long as your not getting any buffer underrun errors with the burner
> you should be fine. Although to insure that my second hard drive was not
> bogging down the primary, I'd only have one HD per IDE channel.
>
> Here's how I would do it just to be safe:
>
> IDE-1  Main Hard Drive (Master)
> IDE-1  CDR/RW  (Slave)  8x4x32
> IDE-2  Second Hard Drive (Master)
> IDE-2  CD-ROM  (Slave)
>
> Regards,
>
> A_C
>
>
>
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.