Thread View: alt.comp.periphs.mainboard.soyo
3 messages
3 total messages
Started by Bradford Guy
Thu, 07 Jan 1999 00:00
CPU wanted - Cyrix 6x86 PR-200 or P54C-200
Author: Bradford Guy
Date: Thu, 07 Jan 1999 00:00
Date: Thu, 07 Jan 1999 00:00
19 lines
1257 bytes
1257 bytes
I have a soyo 5tfo - 82430 hx - p54c pci motherboard with a cyrix p150 Cpu. I want to make it run faster but was told that it will not go faster than 200meg. The board is single voltage. Have you got a single voltage CPU for sale? For example, Cyrix 6x86 PR-200 or P54C-200 If you have one of these left over from your upgrade then why don't you sell it to me? Can anyone tell me if this motherboard will take an MMX200 cpu? Please reply directly to my email box and not to the NG coz I don't read it. --- to reply, remove the "xxx" from email address.
Re: CPU wanted - Cyrix 6x86 PR-200 or P54C-200
Author: Andrew Kressman
Date: Thu, 07 Jan 1999 00:00
Date: Thu, 07 Jan 1999 00:00
31 lines
1832 bytes
1832 bytes
Bradford Guy wrote in message ... >I have a soyo 5tfo - 82430 hx - p54c pci motherboard with a cyrix p150 Cpu. >I want to make it run faster but was told that it will not go faster than >200meg. The board is single voltage. The board may not be single voltage. It depends on the revision. I have a 5TF0 and am using a P200MMX. Look for large heatsinks near the CPU socket. If you have these, then your board has a voltage regulator and can use dual-voltage CPUs. Also, look for a pair of jumpers marked P54C and P55C or something like that. >Can anyone tell me if this motherboard will take an MMX200 cpu? See previous paragraph! >Please reply directly to my email box and not to the NG coz I don't read it. It's your responsibility to read any newsgroups you post to. Otherwise there is no point as others cannot share the information resulting from follow-ups etc... -- (�`�.��.���`�-> Andrew Kressman <-���`�.��.���) AndrewKressman@SnowdonRailway.Force9.Co.Uk http://www.geocities.com/SiliconValley/Pines/5974/ ICQ: 13683199
Re: CPU wanted - Cyrix 6x86 PR-200 or P54C-200
Author: Bradford Guy
Date: Fri, 08 Jan 1999 00:00
Date: Fri, 08 Jan 1999 00:00
49 lines
2267 bytes
2267 bytes
Herrrmmmm. I looked at my board and it has the big heat sink and a pair of jumpers marked P54C and P55C. Does this mean that my board is Dual voltage? and If so, can I just put a p200mmx strait in or do I have alter the jumpers or anything else? Is it possible to go faster than p200mmx ? Thanks for your help mate, you've been a diamond. Andrew Kressman wrote in message ... >Bradford Guy wrote in message ... >>I have a soyo 5tfo - 82430 hx - p54c pci motherboard with a cyrix p150 Cpu. >>I want to make it run faster but was told that it will not go faster than >>200meg. The board is single voltage. > > >The board may not be single voltage. It depends on the revision. I have a >5TF0 and am using a P200MMX. Look for large heatsinks near the CPU socket. >If you have these, then your board has a voltage regulator and can use >dual-voltage CPUs. Also, look for a pair of jumpers marked P54C and P55C or >something like that. > >>Can anyone tell me if this motherboard will take an MMX200 cpu? > > >See previous paragraph! > >>Please reply directly to my email box and not to the NG coz I don't read >it. > > >It's your responsibility to read any newsgroups you post to. Otherwise >there is no point as others cannot share the information resulting from >follow-ups etc... > > >-- >(�`�.��.���`�-> Andrew Kressman <-���`�.��.���) >AndrewKressman@SnowdonRailway.Force9.Co.Uk >http://www.geocities.com/SiliconValley/Pines/5974/ >ICQ: 13683199 > >
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads