🚀 go-pugleaf

I'm about to find out.  Just got my TV Wonder Pro card in the mail and
starting to install it.  I also have the Audigy2 (retail, but not Platinum).
Will report results.

"joe" <joe@verizon.net> wrote in message
news:bk5d6o$ov47i$1@ID-178132.news.uni-berlin.de...
> This message is regarding the echoing problem with the Audigy and the ATI
TV
> player within the Multimedia Center suite.  Basically, when I'm watching
TV
> with the software-based TV player, I can hear echoing like there are two
> copies of the sound coming out, the second one being about a half second
> behind the first one.
>
> I have read several newsgroup articles about this and was glad to discover
> that both ATI and CreativeLabs made fixes for the problem and released
> patched drivers and software.  The problem was supposed to be fixed in
> Multimedia Center 7.7+.
>
> Unfortunately, although I have all the updated software, I am still having
> this problem.  I upgraded to Multimedia Center 7.9 and I did an auto
update
> for my Audigy 2 drivers and it told me that everything was current.
>
> Has anyone else had this problem?  What did you do to fix it?  I've read
> that if you have the Audigy 2 Platinum you can just use line2 for the TV
> player.  I don't have the Platinum version though.  I have the regular OEM
> version of just the card.
>
>
>

"RainMan" <baxteratblargdotnet> wrote in message
news:vmchn23tthf4f4@corp.supernews.com...
> I'm about to find out.  Just got my TV Wonder Pro card in the mail and
> starting to install it.  I also have the Audigy2 (retail, but not
Platinum).
> Will report results.

RainMan, check out this article from ATI:
http://www.ati.com/support/infobase/4008.html

I'm going to try their suggestions as soon as I get home from work.

Thanks, Joe.  I am not able to control or mute the sound, but I will also
try their suggestions when I get home.

"joe" <joe@verizon.net> wrote in message
news:bk5hac$oo3g5$1@ID-178132.news.uni-berlin.de...
> "RainMan" <baxteratblargdotnet> wrote in message
> news:vmchn23tthf4f4@corp.supernews.com...
> > I'm about to find out.  Just got my TV Wonder Pro card in the mail and
> > starting to install it.  I also have the Audigy2 (retail, but not
> Platinum).
> > Will report results.
>
> RainMan, check out this article from ATI:
> http://www.ati.com/support/infobase/4008.html
>
> I'm going to try their suggestions as soon as I get home from work.
>
>

I have the 7500AIW with latest Cat 3.7drivers and MMC 8.6. I have had on this system a 128 pro and a 9700 pro AIW  Audigy 2
platinum, never had the echo problem.   All your effects have been turn off? CMSS, and all EAX?

"joe" <joe@verizon.net> wrote in message news:bk5d6o$ov47i$1@ID-178132.news.uni-berlin.de...
> This message is regarding the echoing problem with the Audigy and the ATI TV
> player within the Multimedia Center suite.  Basically, when I'm watching TV
> with the software-based TV player, I can hear echoing like there are two
> copies of the sound coming out, the second one being about a half second
> behind the first one.
>
> I have read several newsgroup articles about this and was glad to discover
> that both ATI and CreativeLabs made fixes for the problem and released
> patched drivers and software.  The problem was supposed to be fixed in
> Multimedia Center 7.7+.
>
> Unfortunately, although I have all the updated software, I am still having
> this problem.  I upgraded to Multimedia Center 7.9 and I did an auto update
> for my Audigy 2 drivers and it told me that everything was current.
>
> Has anyone else had this problem?  What did you do to fix it?  I've read
> that if you have the Audigy 2 Platinum you can just use line2 for the TV
> player.  I don't have the Platinum version though.  I have the regular OEM
> version of just the card.
>
>
>

I read that article,  the way to get the volume to work properly is to run the initialization wizard from the TV setup window. When
it asks for what input I use 'what you hear'  then when it complains and opens the second window I choose  'line in'....all works as
it should   remote, mixer and the like...No echo..

"joe" <joe@verizon.net> wrote in message news:bk5hac$oo3g5$1@ID-178132.news.uni-berlin.de...
> "RainMan" <baxteratblargdotnet> wrote in message
> news:vmchn23tthf4f4@corp.supernews.com...
> > I'm about to find out.  Just got my TV Wonder Pro card in the mail and
> > starting to install it.  I also have the Audigy2 (retail, but not
> Platinum).
> > Will report results.
>
> RainMan, check out this article from ATI:
> http://www.ati.com/support/infobase/4008.html
>
> I'm going to try their suggestions as soon as I get home from work.
>
>

I notice the echo only appears when I check the "TV best quality" box under
the Video tab in TV Setup.  The picture certainly gets better, but the audio
is shifted by more than a half-second.  There is also a discernable echo.

"JAD" <jdemma25@eartink.net> wrote in message
news:lQF9b.5829$BS5.205@newsread4.news.pas.earthlink.net...
> I have the 7500AIW with latest Cat 3.7drivers and MMC 8.6. I have had on
this system a 128 pro and a 9700 pro AIW  Audigy 2
> platinum, never had the echo problem.   All your effects have been turn
off? CMSS, and all EAX?
>
> "joe" <joe@verizon.net> wrote in message
news:bk5d6o$ov47i$1@ID-178132.news.uni-berlin.de...
> > This message is regarding the echoing problem with the Audigy and the
ATI TV
> > player within the Multimedia Center suite.  Basically, when I'm watching
TV
> > with the software-based TV player, I can hear echoing like there are two
> > copies of the sound coming out, the second one being about a half second
> > behind the first one.
> >
> > I have read several newsgroup articles about this and was glad to
discover
> > that both ATI and CreativeLabs made fixes for the problem and released
> > patched drivers and software.  The problem was supposed to be fixed in
> > Multimedia Center 7.7+.
> >
> > Unfortunately, although I have all the updated software, I am still
having
> > this problem.  I upgraded to Multimedia Center 7.9 and I did an auto
update
> > for my Audigy 2 drivers and it told me that everything was current.
> >
> > Has anyone else had this problem?  What did you do to fix it?  I've read
> > that if you have the Audigy 2 Platinum you can just use line2 for the TV
> > player.  I don't have the Platinum version though.  I have the regular
OEM
> > version of just the card.
> >
> >
> >
>
>

what version of MMC?  i do not have a 'TV best quality' setting....what have you set the tuner to  ntsc, pal, ntscj?


"RainMan" <baxteratblargdotnet> wrote in message news:vmej0944l2trea@corp.supernews.com...
> I notice the echo only appears when I check the "TV best quality" box under
> the Video tab in TV Setup.  The picture certainly gets better, but the audio
> is shifted by more than a half-second.  There is also a discernable echo.
>
> "JAD" <jdemma25@eartink.net> wrote in message
> news:lQF9b.5829$BS5.205@newsread4.news.pas.earthlink.net...
> > I have the 7500AIW with latest Cat 3.7drivers and MMC 8.6. I have had on
> this system a 128 pro and a 9700 pro AIW  Audigy 2
> > platinum, never had the echo problem.   All your effects have been turn
> off? CMSS, and all EAX?
> >
> > "joe" <joe@verizon.net> wrote in message
> news:bk5d6o$ov47i$1@ID-178132.news.uni-berlin.de...
> > > This message is regarding the echoing problem with the Audigy and the
> ATI TV
> > > player within the Multimedia Center suite.  Basically, when I'm watching
> TV
> > > with the software-based TV player, I can hear echoing like there are two
> > > copies of the sound coming out, the second one being about a half second
> > > behind the first one.
> > >
> > > I have read several newsgroup articles about this and was glad to
> discover
> > > that both ATI and CreativeLabs made fixes for the problem and released
> > > patched drivers and software.  The problem was supposed to be fixed in
> > > Multimedia Center 7.7+.
> > >
> > > Unfortunately, although I have all the updated software, I am still
> having
> > > this problem.  I upgraded to Multimedia Center 7.9 and I did an auto
> update
> > > for my Audigy 2 drivers and it told me that everything was current.
> > >
> > > Has anyone else had this problem?  What did you do to fix it?  I've read
> > > that if you have the Audigy 2 Platinum you can just use line2 for the TV
> > > player.  I don't have the Platinum version though.  I have the regular
> OEM
> > > version of just the card.
> > >
> > >
> > >
> >
> >
>
>

"joe" <joe@verizon.net> wrote in message
news:bk5d6o$ov47i$1@ID-178132.news.uni-berlin.de...
> This message is regarding the echoing problem with the Audigy and the ATI
TV
> player within the Multimedia Center suite.  Basically, when I'm watching
TV
> with the software-based TV player, I can hear echoing like there are two
> copies of the sound coming out, the second one being about a half second
> behind the first one.
>

I followed ATI's instructions for using the mic input on the sound card but
that didn't work (no sound).  I also tried uninstalling the Audigy software
while leaving the drivers in tact but that didn't work either.

However, I was able to fix the problem by uninstalling Multimedia Center and
then reinstalling it.  Previously, I had an old version (7.3?) and when I
upgraded I just installed the new version 7.9 over it.  I should have
completely uninstalled it before putting the new version on.  It works great
now.  I installed all of the Audigy software and it still works.

Make sure to update your ATI drivers and Audigy drivers.  A couple of days
ago (when I was still having the problem) I did a Windows Update and
installed a couple of "multimedia" updates from ATI.  It didn't fix the
problem immediately but maybe it helped get me to where I am now.

MMC 8.2.   I installed with all the defaults.  Where do I find those tuner
settings?

"JAD" <jdemma25@eartink.net> wrote in message
news:jhI9b.5958$BS5.391@newsread4.news.pas.earthlink.net...
> what version of MMC?  i do not have a 'TV best quality' setting....what
have you set the tuner to  ntsc, pal, ntscj?
>
>
> "RainMan" <baxteratblargdotnet> wrote in message
news:vmej0944l2trea@corp.supernews.com...
> > I notice the echo only appears when I check the "TV best quality" box
under
> > the Video tab in TV Setup.  The picture certainly gets better, but the
audio
> > is shifted by more than a half-second.  There is also a discernable
echo.
> >
> > "JAD" <jdemma25@eartink.net> wrote in message
> > news:lQF9b.5829$BS5.205@newsread4.news.pas.earthlink.net...
> > > I have the 7500AIW with latest Cat 3.7drivers and MMC 8.6. I have had
on
> > this system a 128 pro and a 9700 pro AIW  Audigy 2
> > > platinum, never had the echo problem.   All your effects have been
turn
> > off? CMSS, and all EAX?
> > >
> > > "joe" <joe@verizon.net> wrote in message
> > news:bk5d6o$ov47i$1@ID-178132.news.uni-berlin.de...
> > > > This message is regarding the echoing problem with the Audigy and
the
> > ATI TV
> > > > player within the Multimedia Center suite.  Basically, when I'm
watching
> > TV
> > > > with the software-based TV player, I can hear echoing like there are
two
> > > > copies of the sound coming out, the second one being about a half
second
> > > > behind the first one.
> > > >
> > > > I have read several newsgroup articles about this and was glad to
> > discover
> > > > that both ATI and CreativeLabs made fixes for the problem and
released
> > > > patched drivers and software.  The problem was supposed to be fixed
in
> > > > Multimedia Center 7.7+.
> > > >
> > > > Unfortunately, although I have all the updated software, I am still
> > having
> > > > this problem.  I upgraded to Multimedia Center 7.9 and I did an auto
> > update
> > > > for my Audigy 2 drivers and it told me that everything was current.
> > > >
> > > > Has anyone else had this problem?  What did you do to fix it?  I've
read
> > > > that if you have the Audigy 2 Platinum you can just use line2 for
the TV
> > > > player.  I don't have the Platinum version though.  I have the
regular
> > OEM
> > > > version of just the card.
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

start TV  go to  -settings-  video tab  you should have  color  tint etc  on the left   and on the right top   source and below TV
standards...USA version  could be different for elsewhere.



"RainMan" <baxteratblargdotnet> wrote in message news:vmf2t39mqdcl34@corp.supernews.com...
> MMC 8.2.   I installed with all the defaults.  Where do I find those tuner
> settings?
>
> "JAD" <jdemma25@eartink.net> wrote in message
> news:jhI9b.5958$BS5.391@newsread4.news.pas.earthlink.net...
> > what version of MMC?  i do not have a 'TV best quality' setting....what
> have you set the tuner to  ntsc, pal, ntscj?
> >
> >
> > "RainMan" <baxteratblargdotnet> wrote in message
> news:vmej0944l2trea@corp.supernews.com...
> > > I notice the echo only appears when I check the "TV best quality" box
> under
> > > the Video tab in TV Setup.  The picture certainly gets better, but the
> audio
> > > is shifted by more than a half-second.  There is also a discernable
> echo.
> > >
> > > "JAD" <jdemma25@eartink.net> wrote in message
> > > news:lQF9b.5829$BS5.205@newsread4.news.pas.earthlink.net...
> > > > I have the 7500AIW with latest Cat 3.7drivers and MMC 8.6. I have had
> on
> > > this system a 128 pro and a 9700 pro AIW  Audigy 2
> > > > platinum, never had the echo problem.   All your effects have been
> turn
> > > off? CMSS, and all EAX?
> > > >
> > > > "joe" <joe@verizon.net> wrote in message
> > > news:bk5d6o$ov47i$1@ID-178132.news.uni-berlin.de...
> > > > > This message is regarding the echoing problem with the Audigy and
> the
> > > ATI TV
> > > > > player within the Multimedia Center suite.  Basically, when I'm
> watching
> > > TV
> > > > > with the software-based TV player, I can hear echoing like there are
> two
> > > > > copies of the sound coming out, the second one being about a half
> second
> > > > > behind the first one.
> > > > >
> > > > > I have read several newsgroup articles about this and was glad to
> > > discover
> > > > > that both ATI and CreativeLabs made fixes for the problem and
> released
> > > > > patched drivers and software.  The problem was supposed to be fixed
> in
> > > > > Multimedia Center 7.7+.
> > > > >
> > > > > Unfortunately, although I have all the updated software, I am still
> > > having
> > > > > this problem.  I upgraded to Multimedia Center 7.9 and I did an auto
> > > update
> > > > > for my Audigy 2 drivers and it told me that everything was current.
> > > > >
> > > > > Has anyone else had this problem?  What did you do to fix it?  I've
> read
> > > > > that if you have the Audigy 2 Platinum you can just use line2 for
> the TV
> > > > > player.  I don't have the Platinum version though.  I have the
> regular
> > > OEM
> > > > > version of just the card.
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

It's NTSC, and I can't change it.

"JAD" <jdemma25@eartink.net> wrote in message
news:8bM9b.6180$BS5.238@newsread4.news.pas.earthlink.net...
> start TV  go to  -settings-  video tab  you should have  color  tint etc
on the left   and on the right top   source and below TV
> standards...USA version  could be different for elsewhere.
>
>
>
> "RainMan" <baxteratblargdotnet> wrote in message
news:vmf2t39mqdcl34@corp.supernews.com...
> > MMC 8.2.   I installed with all the defaults.  Where do I find those
tuner
> > settings?
> >
> > "JAD" <jdemma25@eartink.net> wrote in message
> > news:jhI9b.5958$BS5.391@newsread4.news.pas.earthlink.net...
> > > what version of MMC?  i do not have a 'TV best quality'
setting....what
> > have you set the tuner to  ntsc, pal, ntscj?
> > >
> > >
> > > "RainMan" <baxteratblargdotnet> wrote in message
> > news:vmej0944l2trea@corp.supernews.com...
> > > > I notice the echo only appears when I check the "TV best quality"
box
> > under
> > > > the Video tab in TV Setup.  The picture certainly gets better, but
the
> > audio
> > > > is shifted by more than a half-second.  There is also a discernable
> > echo.
> > > >
> > > > "JAD" <jdemma25@eartink.net> wrote in message
> > > > news:lQF9b.5829$BS5.205@newsread4.news.pas.earthlink.net...
> > > > > I have the 7500AIW with latest Cat 3.7drivers and MMC 8.6. I have
had
> > on
> > > > this system a 128 pro and a 9700 pro AIW  Audigy 2
> > > > > platinum, never had the echo problem.   All your effects have been
> > turn
> > > > off? CMSS, and all EAX?
> > > > >
> > > > > "joe" <joe@verizon.net> wrote in message
> > > > news:bk5d6o$ov47i$1@ID-178132.news.uni-berlin.de...
> > > > > > This message is regarding the echoing problem with the Audigy
and
> > the
> > > > ATI TV
> > > > > > player within the Multimedia Center suite.  Basically, when I'm
> > watching
> > > > TV
> > > > > > with the software-based TV player, I can hear echoing like there
are
> > two
> > > > > > copies of the sound coming out, the second one being about a
half
> > second
> > > > > > behind the first one.
> > > > > >
> > > > > > I have read several newsgroup articles about this and was glad
to
> > > > discover
> > > > > > that both ATI and CreativeLabs made fixes for the problem and
> > released
> > > > > > patched drivers and software.  The problem was supposed to be
fixed
> > in
> > > > > > Multimedia Center 7.7+.
> > > > > >
> > > > > > Unfortunately, although I have all the updated software, I am
still
> > > > having
> > > > > > this problem.  I upgraded to Multimedia Center 7.9 and I did an
auto
> > > > update
> > > > > > for my Audigy 2 drivers and it told me that everything was
current.
> > > > > >
> > > > > > Has anyone else had this problem?  What did you do to fix it?
I've
> > read
> > > > > > that if you have the Audigy 2 Platinum you can just use line2
for
> > the TV
> > > > > > player.  I don't have the Platinum version though.  I have the
> > regular
> > > > OEM
> > > > > > version of just the card.
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

 if your in the USA then the setting is OK, but the fact that you can't change it is a sign of a bad install...was there an 8.2?
8.1 >8.5   must have missed one....


"RainMan" <baxteratblargdotnet> wrote in message news:vmf4c750n10fa6@corp.supernews.com...
> It's NTSC, and I can't change it.
>
> "JAD" <jdemma25@eartink.net> wrote in message
> news:8bM9b.6180$BS5.238@newsread4.news.pas.earthlink.net...
> > start TV  go to  -settings-  video tab  you should have  color  tint etc
> on the left   and on the right top   source and below TV
> > standards...USA version  could be different for elsewhere.
> >
> >
> >
> > "RainMan" <baxteratblargdotnet> wrote in message
> news:vmf2t39mqdcl34@corp.supernews.com...
> > > MMC 8.2.   I installed with all the defaults.  Where do I find those
> tuner
> > > settings?
> > >
> > > "JAD" <jdemma25@eartink.net> wrote in message
> > > news:jhI9b.5958$BS5.391@newsread4.news.pas.earthlink.net...
> > > > what version of MMC?  i do not have a 'TV best quality'
> setting....what
> > > have you set the tuner to  ntsc, pal, ntscj?
> > > >
> > > >
> > > > "RainMan" <baxteratblargdotnet> wrote in message
> > > news:vmej0944l2trea@corp.supernews.com...
> > > > > I notice the echo only appears when I check the "TV best quality"
> box
> > > under
> > > > > the Video tab in TV Setup.  The picture certainly gets better, but
> the
> > > audio
> > > > > is shifted by more than a half-second.  There is also a discernable
> > > echo.
> > > > >
> > > > > "JAD" <jdemma25@eartink.net> wrote in message
> > > > > news:lQF9b.5829$BS5.205@newsread4.news.pas.earthlink.net...
> > > > > > I have the 7500AIW with latest Cat 3.7drivers and MMC 8.6. I have
> had
> > > on
> > > > > this system a 128 pro and a 9700 pro AIW  Audigy 2
> > > > > > platinum, never had the echo problem.   All your effects have been
> > > turn
> > > > > off? CMSS, and all EAX?
> > > > > >
> > > > > > "joe" <joe@verizon.net> wrote in message
> > > > > news:bk5d6o$ov47i$1@ID-178132.news.uni-berlin.de...
> > > > > > > This message is regarding the echoing problem with the Audigy
> and
> > > the
> > > > > ATI TV
> > > > > > > player within the Multimedia Center suite.  Basically, when I'm
> > > watching
> > > > > TV
> > > > > > > with the software-based TV player, I can hear echoing like there
> are
> > > two
> > > > > > > copies of the sound coming out, the second one being about a
> half
> > > second
> > > > > > > behind the first one.
> > > > > > >
> > > > > > > I have read several newsgroup articles about this and was glad
> to
> > > > > discover
> > > > > > > that both ATI and CreativeLabs made fixes for the problem and
> > > released
> > > > > > > patched drivers and software.  The problem was supposed to be
> fixed
> > > in
> > > > > > > Multimedia Center 7.7+.
> > > > > > >
> > > > > > > Unfortunately, although I have all the updated software, I am
> still
> > > > > having
> > > > > > > this problem.  I upgraded to Multimedia Center 7.9 and I did an
> auto
> > > > > update
> > > > > > > for my Audigy 2 drivers and it told me that everything was
> current.
> > > > > > >
> > > > > > > Has anyone else had this problem?  What did you do to fix it?
> I've
> > > read
> > > > > > > that if you have the Audigy 2 Platinum you can just use line2
> for
> > > the TV
> > > > > > > player.  I don't have the Platinum version though.  I have the
> > > regular
> > > > > OEM
> > > > > > > version of just the card.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Thanks, JAD.  I finally got the volume control to work.  The sequence was
only slightly different from what you described.  When it asked for audio
input source, I selected "Analog Mix (Line/CD/...".  It then complained, and
I selected "Line In".  Works fine now.

"JAD" <jdemma25@eartink.net> wrote in message
news:XUF9b.5832$BS5.4696@newsread4.news.pas.earthlink.net...
> I read that article,  the way to get the volume to work properly is to run
the initialization wizard from the TV setup window. When
> it asks for what input I use 'what you hear'  then when it complains and
opens the second window I choose  'line in'....all works as
> it should   remote, mixer and the like...No echo..
>
> "joe" <joe@verizon.net> wrote in message
news:bk5hac$oo3g5$1@ID-178132.news.uni-berlin.de...
> > "RainMan" <baxteratblargdotnet> wrote in message
> > news:vmchn23tthf4f4@corp.supernews.com...
> > > I'm about to find out.  Just got my TV Wonder Pro card in the mail and
> > > starting to install it.  I also have the Audigy2 (retail, but not
> > Platinum).
> > > Will report results.
> >
> > RainMan, check out this article from ATI:
> > http://www.ati.com/support/infobase/4008.html
> >
> > I'm going to try their suggestions as soon as I get home from work.
> >
> >
>
>

cool.. glad it worked out,,,thanks for posting back

"RainMan" <baxteratblargdotnet> wrote in message news:vmkar7hrc2rfe6@corp.supernews.com...
> Thanks, JAD.  I finally got the volume control to work.  The sequence was
> only slightly different from what you described.  When it asked for audio
> input source, I selected "Analog Mix (Line/CD/...".  It then complained, and
> I selected "Line In".  Works fine now.
>
> "JAD" <jdemma25@eartink.net> wrote in message
> news:XUF9b.5832$BS5.4696@newsread4.news.pas.earthlink.net...
> > I read that article,  the way to get the volume to work properly is to run
> the initialization wizard from the TV setup window. When
> > it asks for what input I use 'what you hear'  then when it complains and
> opens the second window I choose  'line in'....all works as
> > it should   remote, mixer and the like...No echo..
> >
> > "joe" <joe@verizon.net> wrote in message
> news:bk5hac$oo3g5$1@ID-178132.news.uni-berlin.de...
> > > "RainMan" <baxteratblargdotnet> wrote in message
> > > news:vmchn23tthf4f4@corp.supernews.com...
> > > > I'm about to find out.  Just got my TV Wonder Pro card in the mail and
> > > > starting to install it.  I also have the Audigy2 (retail, but not
> > > Platinum).
> > > > Will report results.
> > >
> > > RainMan, check out this article from ATI:
> > > http://www.ati.com/support/infobase/4008.html
> > >
> > > I'm going to try their suggestions as soon as I get home from work.
> > >
> > >
> >
> >
>
>