🚀 go-pugleaf

In article <MPG.108b1f578b40a5c989682@news.citenet.net>,
  cybermindx@planetquake.com (Alex "Cybermind" Redman) wrote:
> In article <362194ad.2065865@news.a2000.nl>, tonijnsalade@freemail.nl
> says...
>
> > I just bought 2 stealth coolers for my voodoo2 SLI setup &
> > a lasagna coolers for my mill. G200. They're working on a
> > BH6 with a cel. 300 @ 450 mhz., 2.0 v (which is cooled with the
> > standard celeron cooler)
> > Before using those coolers I had a mobo temp. of about 39 C,
> > now, after 1 hour on Unreal, I get about 37 C ....
> > (btw, I leave my case open, otherwise it will heat up very quickly)
> > ....
> >
> > Only 2 degrees with those 3 coolers ?????
> >
> > what's going on ??
> >
> > regards,
> > robin
> >
> >
>
> Actually dude, you should leave your case CLOSED, so that air circulates
> properly around the Mboard and component cards. I know many non technical
> people will argue about this, but the fact is that's the way cases are
> designed to work - to circulate air at so-many linear feet per second
> down past the HDs, over the PCI cards, and out the front of the case.
>
> You should also make sure that all emtpy expansion slots have their
> backplates on, so proper airflow is maintained.
>
> Of course this is not the final word, there are other ways of providing
> sufficient cooling, such as a Peltier cooling system, or leaving the case
> open and directing OBSCENE amounts of air straight over all the cards
> (this will REALLY dust up your case, and shorten the life of your
> components as well, sorry to say).
>
> Just a few pointers from your friendly neighborhood CPU wholesaler.
>
> Cybermind
>
> Cybermind
>

Yeah, and how you put your coolers? I have in my case 8 coolers. Front all
coolers push the air and back coolers pull the air so there is very good air
flow in inside of my case. I have some couple coolers pushing air in left side
of case too :) But m/b temp is around 40.. I have dual p2 300, 4hd and ELSA
GLoria-XXL which makes lot of heat too with those grafic prosessors.

40 is not still bad.. in my old case there was around 40-70 and thats too
big.. sometimes my machine crashed because of heat (ambien temp is around
20-35). So don`t worry about 30-40. Usually max temp for computer part is
about 50-60.

-oka

-----------== Posted via Deja News, The Discussion Network ==----------
http://www.dejanews.com/       Search, Read, Discuss, or Start Your Own