🚀 go-pugleaf

Well that is an older generation card that uses more voltage and less
efficient cooling (usually). These new cards only draw 4W, overclock away!
You wont even need to pull your hand away from it when touching the chip,
unlike my old TNT1 which could fry bacon. Worst case is you lock up the
comp, and have to restart. Big deal.

"Tanja Steffens" <tanja228@t-online.de> wrote in message
news:8rv42s$c5k$04$1@news.t-online.com...
>
> "SST" <boead@hotmail.com> wrote in message
> news:oWDE5.8487$6t3.307190@newsread1.prod.itd.earthlink.net...
> > why is that a risk? (170/200)
> >
> > I doubt the card cad be damaged. Generally heat makes them lock up,
> nothing
> > more.
>
> That is true ,
> Hmm , but i know a guy who o/c his Voodoo 3 to much and afther 3 days
> working fine , it dies
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> > > For the moment the different is only 400Marks ,but in the next days i
> > > will change my cpu to something about 800 Mhz
> > > ,then there will be a higher different.
> > > I don t know if it is realy a big risk ,the cooler +fan i put on it
are
> > very
> > > big (i lost 2 PCI slots) the card works fine at 160/200
> > > but i m useing "only" 155/195 and i know others who overclock it
> > > to 170/200(that is risk)
> > >
> > >
> > >
> > > "Rodrigo G�mez" <rgomezREMOVE@ags.ciateq.mx> wrote in message
> > > news:8rtjdm$a0k$1@news.creativelabs.com...
> > > > And it is really some improvement?
> > > >
> > > >     Because If I'm going to put my CLAP at that risk, I would like
> 2000+
> > > > 3dmarks... well... maybe not so much, but something I can "touch".
> > > >
> > > >     Rodrigo G�mez
> > > >
> > > > "Tanja Steffens" <tanja228@t-online.de> escribi� en el mensaje
> > > > news:8rtb29$h2r$02$1@news.t-online.com...
> > > > > No
> > > > > double click on 135 then you can change to what ever you want
> > > > > I have put a pentium cooler+fan on my CLA now it works
> > > > > fine with 155/195
> > > > >
> > > > > "SST" <boead@hotmail.com> wrote in message
> > > > > news:oPoE5.6703$D81.277206@newsread2.prod.itd.earthlink.net...
> > > > > > ????
> > > > > >
> > > > > > 135Mhz is the fastest Graphics Core Clock.
> > > > > >
> > > > > > 332Mhz Memory Clock is max as well.
> > > > > >
> > > > > >
> > > > > > "Tanja Steffens" <tanja228@t-online.de> wrote in message
> > > > > > news:8rs0d7$39q$16$1@news.t-online.com...
> > > > > > > Hi
> > > > > > > the best is the "display director" it is coming with Fast Trax
> > > driver
> > > > > ,you
> > > > > > > can then install other driver over it ,and use the D.D. with
> every
> > > > > driver.
> > > > > > > My CLA works fine at 140/200 Reference Driver 6.31
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > "SST" <boead@hotmail.com> wrote in message
> > > > > > > news:yS8E5.3057$6t3.132737@newsread1.prod.itd.earthlink.net...
> > > > > > > > Looking for OC utility for CLAP
> > > > > > > >
> > > > > > > > Do I need to use FastTrack?
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>