🚀 go-pugleaf

There is a AMR port under my AGP, it will only kill 1 (maby 2 if the card is
very big)

"Rich Lockyer" <rlockyer@linkline.DONTSPAMME.com> skrev i en meddelelse
news:3981d22a.142905723@news.linkline.com...
> On Mon, 24 Jul 2000 15:09:46 GMT, "peet_dk" <peet_dk@nospam.dk> wrote:
>
> >it's K7 a have. But I thinking just buy http://www.tennmax.com/ Lasagna
BGA
> >Cooler, but it's only in US (okay they can send it but.....) Then I'm
> >thinking about a golden orb, do some of you have some good advise about
> >setting it on, if this going to be on the card? (its very big I think)
>
> The Gorb will kill two or three PCI slots.  I read one place where
> someone carefully trimmed the top of the Gorb down and reinstalled the
> fan, I think they got it down to only killing one PCI slot...
> definitely better than other solutions.
> Yes, even trimmed, the Gorb will cool better than the Tennmax BGA
> cooler.
>
> For mounting, the BEST (and most expensive) way to do it is to use
> thermal epoxy.  Second best way it to CAREFULLY apply a thin layer of
> thermal compound to the center of the GPU, then use four SMALL spots
> of superglue on the corners of the GPU... I wouldn't trust it, but it
> has been reported to work well.
> The other way is to put a piece of square copper tube (or "c" channel)
> across the top of the Gorb and mount it with tie-wraps through the
> original mounting holes in the card.
>
>