🚀 go-pugleaf

Go buy Real Computers
IBM is one of most Fuck up System I had ever seing
why that. the Mother Board Bios are fuck up there are stander
beside you in wonge new group

ECS Systems wrote in message <6ba16h$22v$1@newsbell.bellglobal.com>...
>I am trying to help a friend install a hard drive in a system with a IBM
>200+ ( Cyrix ). The problem is that the drive which is a Maxtor 1.2 GB hard
>drive and the CMOS when trying to auto detect is telling me that it is 9945
>in size instead of 1260. The drive did work properly before but now seems
to
>be misrepresenting the size in autodetect. I have been to Maxtors homepage
>and there are no troubleshooting tips that relate to this type of
>problem....  HELPP!!!!!!!!
>
>
>

Don't autodetect: enter specs manually !

Greetings (and good luck ;-]  )
Leo


ECS Systems heeft geschreven in bericht
<6ba16h$22v$1@newsbell.bellglobal.com>...
>I am trying to help a friend install a hard drive in a system with a IBM
>200+ ( Cyrix ). The problem is that the drive which is a Maxtor 1.2 GB hard
>drive and the CMOS when trying to auto detect is telling me that it is 9945
>in size instead of 1260. The drive did work properly before but now seems
to
>be misrepresenting the size in autodetect. I have been to Maxtors homepage
>and there are no troubleshooting tips that relate to this type of
>problem....  HELPP!!!!!!!!
>

the problem is the bios and how old it is, it may not regonise the drive
properlly and the best thing to do is make sure that anything over 1.gig has
LBA next to the figures it comes up with....

I had a computer that I had a 6.5 gig HD to and the bios would not recognise
the drive unless it had some sort of overlay from the manufacturer
installed.

--
--------------------------------------------------------------------
Andrew C Scott   -    Splash!  Customer Service Representative.
andrewcs@beamsoft.com   http://www.gosplash.com
"Free Demo of Splash available NOW! - www.gosplash.com"
--------------------------------------------------------------------
Quentin Christensen wrote in message <34D8FADB.3F01F1EE@ozramp.net.au>...
>ECS Systems wrote:
>>
>> I am trying to help a friend install a hard drive in a system with a IBM
>> 200+ ( Cyrix ). The problem is that the drive which is a Maxtor 1.2 GB
hard
>> drive and the CMOS when trying to auto detect is telling me that it is
9945
>> in size instead of 1260. The drive did work properly before but now seems
to
>> be misrepresenting the size in autodetect. I have been to Maxtors
homepage
>> and there are no troubleshooting tips that relate to this type of
>> problem....  HELPP!!!!!!!!
>
>
>I don't know if this is your problem or not but:  computers can have
>trouble telling the size of large hard drives, I think it's greater than
>1.2 GB, but I'm not sure.  My computer's BIOS quite happily tells me
>that my 2.5 GB hard drive is a 450 MB but it works fine, although it
>does know that my 1.2 GB drive is a 1.2 GB drive...  I don't know if
>that helps or not, readin throuh what I just wrote probably not!
>
>What I would suggest, is telling the BIOS manually how many heads and
>cylanders and things manually, partition (if you want - definately if
>you are using FAT16 - the default DOS / WINDOWS type), format and see if
>it works.  NOTE: if you don't know these things, contact Maxtor and find
>out from them.
>
>Quentin
>--
>                                     -/\_
>            +                       -/\  \___    --==>
>Quentin Christensen            ####//_\\___\_              +
>0921939@enemy.swin.edu.au      ####\\ //___/
>You must make your enemy your bud   -\/ _/          +     --==>
>and all will be well...              -\/
>http://www.ozramp.net.au/~minx/index.html

In article <6ba16h$22v$1@newsbell.bellglobal.com>, ecssystm@isys.ca 
says...
> I am trying to help a friend install a hard drive in a system with a IBM
> 200+ ( Cyrix ). The problem is that the drive which is a Maxtor 1.2 GB hard
> drive and the CMOS when trying to auto detect is telling me that it is 9945
> in size instead of 1260. The drive did work properly before but now seems to
> be misrepresenting the size in autodetect. I have been to Maxtors homepage
> and there are no troubleshooting tips that relate to this type of
> problem....  HELPP!!!!!!!!
> 
> 
> 
> 
have you tried entering in the drive info as a user defined? if that 
won't help, I don't know unless there is a program that maxtor is using 
similar to the ones supplied by seagate on some of their drives. (in the 
early days, you copied the info to a floppy disk then loaded it on as a 
utils tool after the drive was formatted)