Canon BJC 600e Printer Problem-HELP!!!

Thread View: alt.computer.workshop.live

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by jsb Fri, 01 Jan 1999 00:00

#20

Author: jsb
Date: Fri, 01 Jan 1999 00:00

9 lines
1277 bytes

I just brought me father in law's Canon BJC600e home with me over the
holidays and I'm getting an error that the waste ink container is full.  In
browsing the we I found that Canon wants $150 to fix this problem.   I also
understand the waste ink container consists of a couple of pads that can be
replaced or cleaned, but the problem seems that no one knows how to reset
the error message.  Does anyone have any idea or experience with this
problem??   Thanks in advance for your help.

jsb@cyberramp.net

Re: Canon BJC 600e Printer Problem-HELP!!!

#21

Author: Rick Norton
Date: Sat, 02 Jan 1999 00:00

9 lines
1210 bytes

I have a bjc600 and had similar problem. Error message that a color was out
but it wasn't. In reading manual I thought I had same trouble. Called Canon
and was told maybe ink tank wasn't flowing right. May have dried up at the
wick transfer area. (Was using Nu-Cote ink) Was instructed by Canon tech to
tap tank against desk with paper towel to catch ink in a way that would
force ink out the hole where the wick is. Will make a mess. When I had a
flow of ink coming out the hole I reinstalled it, then ran the complete
clean cycle. Cleared up the problem. Hope this helps.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads