Tandy 1400 HD hard drive

Thread View: alt.computer.workshop.live

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Robert E. Faircloth, D.M.D. Wed, 13 Nov 1996 00:00

Author: Robert E. Faircloth, D.M.D.
Date: Wed, 13 Nov 1996 00:00

18 lines
1760 bytes

I have a second hand Tandy 1400 HD, with no manual, but have a copy of
MS-DOS 3.30.  It works fine except I can't access the hard drive.  The hard
drive LED repeatedly blinks twice, waits a moment, then repeats.  I've
checked all the cables connecters and they seem OK.

1) Is a driver needed to access the drive?
or
2) Is the drive bad?
or
3) Is the interface card bad?

The hard drive is an ALPS  DRP020A10A.  ALPS no longer makes drives, they
were of no help!
Any help would be greatly appreciated.

Robert E. Faircloth, D.M.D.
<drrobert@pineland.net>

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads