🚀 go-pugleaf

thanks for the help,,turned out to be a bad ram module in the end,,now
that's changed the problem has gone,,,thanks again Paul
"Mario Digerati" <joeking@invalid.net> wrote in message
news:a589hh$5eevb$1@ID-108846.news.dfncis.de...
>
> "PAUL" <p-e-f@get2net.dk> wrote in message
news:UTzd8.160$wo5.5157@news.get2net.dk...
> > i`m trying to install win 98se on a compaq desktop,, the harddisk( a 1.6
Gb
> > quantum)had windows 95 on it before, which i rebooted in dos and
> > formatted,,i also ran fdisk on the 98 start up floppy and deleted all
> > partitions as i suspected that there was a virus on the disk,then
98setup
> > did a format,,and starts the blue set up screen``enter to continue``
then
> > scan disk runs and then i get a blank screen with...Standard mode:fault
> > outside of ms dos extender.
> >  EC=0000 CS=0337 IP=C199 AX=0000 BX=0000 CX=0040 DX=FFFF SI=0000
> >  DI= 0000 BP=016E DS=036F ES=0000 SS=027F SP=0166
>
>
> This is often an issue with memory software can easily find, go here
> http://www.teresaudio.com/memtest86/   and test your memory.
>
>
>
>
> >  Please romove any floppy disks from your drives and press any key to
> > restart your system.
> >    i tried another disk and it gave me the same message,,,i know that
both
> > of these disks are ok,,so i guess its something i did with the fdisk
> > program..last week i did the same procedure on the compaq with a 4.3 gb
disk
> > and that installed 98 ok..i cleared the cmos aswell to see if that
> > helped,,but no luck there,,,
> >   so if anyone can help i would really be grateful.
> > Thanks Paul
> >
> >
> >
>
>