🚀 go-pugleaf

 Get a cheap Ethernet board for your Amiga, and a router for your cable modem.
Get them both online, and you can use Amiga Explorer's TCP/IP option instead of
the serial option to send files over the 'net.

 I guess in theory you don't need the 'net at all, just link directly, but I
wouldn't have the patience to figure out the logistics on the Amiga side.

 Of course, this assumes you can get an Ethernet board for your Amiga... there's
one on EBay right now for $40 or so.  If its an A500, I don't know what else to
tell ya.

Mark wrote:

> Hi Ryan...
>
> Yes, I have a cable modem at home hooked into my PC. Although I'm a bit lost
> by your statement...can you explain please...
>
> "Ryan J. Paque" <rpaque@stritch.edu> wrote in message
> news:3CAD3432.341B6F40@stritch.edu...
> > Do you have access to a PC hooked into a high-speed internet connection?
> Amiga
> > Forever's 3.x configs allow the Amiga to use your PC's TCP/IP stack...
> I've
> > gotten transfer rates at up to 260K/second.
> >
> >  Ryan
> >
> > Marcel DeVoe wrote:
> >
> > > In comp.sys.amiga.emulations Rainer Poisel <rainer.poisel@kstp.at>
> wrote:
> > > > colin wrote:
> > >
> > > >>
> > > >> Mark <mambrose@nospam.bigpond.net.au> wrote in message
> > > >> news:uPqb8.31176$Zu6.152525@news-server.bigpond.net.au...
> > > >>> Hi....
> > > >>>
> > > >>> Is there anyway to get higher than 38400 serial port baud rate
> between my
> > > >> PC
> > > >>> and my Amiga 1200. I am using Amiga Explorer (from Amiga Forever)
> and
> > > >>> only get a reliable connection at 38400....
> > > >>>
> > > >>> Trouble is, it's taking AGES to transfer files...
> > > >>>
> > > >>> Any ideas anyone...Amiga 1200 is bog stock...nothing in it except a
> 3GB
> > > >> HDD.
> > > >>>
> > > >>> Cheers
> > > >>>
> > > >>> Mark
> > > >>>
> > > >>
> > > >> http://www.aminet.org/pub/aminet/comm/net/paradise.lha
> > > >>
> > > >> http://www.aminet.org/pub/aminet/comm/net/paradise.readme
> > >
> > > > Try
> > >
> > > > http://homepage.uibk.ac.at/homepage/c725/c72578/amiga/
> > >
> > > > I had a lot of fun with it. A friend of me was able to transfer files
> with
> > > > up to 115200 baud!!!
> > >
> > > That's still translates to only about about 10-11k/sec "bytes".
> > >
> > > With a commonly available parallel Laplink and the Pc2Am program from
> > > Aminet which includes files for both Amiga and PC-DOS (it runs in it's
> own
> > > DOS shell from Windows) I get about 40k bytes/sec in one direction and
> 30k
> > > bytes/sec in the other.
> > >
> > > --
> > > Marcel J. DeVoe - mdevoe@shore.net - Team *AMIGA*
> > > A4091scsi CV64 96 megs CDRW M1764-17" Catweasel FUSION/Emplant
> > > A4000/060 CyberStorm MKII overclocked 66mhz - see "How to Overclock!"
> > > and "DIY A4000 Tower for $45"  @   http://www.shore.net/~mdevoe
> >