🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: alt.internet.wireless
Article #486

Re: Linksys software problem

#486
From: Joe W
Date: Fri, 04 Apr 2003 01:35
41 lines
3325 bytes
"Alan" <blintze@yahoo.com> wrote in message
news:33496fe3.0304031353.4744c417@posting.google.com...
| I have a Linksys BEFW11S4 wireless AP router, and WUSB11 wireless
| adapters, with a Westell 2100 ADSL modem (Bellsouth is the provider).
|
| Prior to installing the router, I could share internet access between
| the 2 adapters (a third one did not work due to the distance involved.
| When I installed the BEFW11S4, I lost the use of the adapters for
| internet sharing.  I could see the adapters, but not access them.
| Pinging does not work.
|
| I spoke to Linksys, who said I was using the Wireless zero
| configuration, and I need to disable it and rerun the Linksys
| installation software to load the driver.
|
| This is where the problem comes in.  The setup utility will not run.
| If I bypass it, and just do a plug and play load of the driver, even
| though I have the driver, the installer will not recognize it.
|
| I suspect there is some dll or registry entry causing this problem,
| but I can't find it.  Does anyone have any suggestions?  The wife and
| kids are on my back about this.

Are you using the modem on USB or Ethernet?  With ethernet, you can connect
it directly to the router and switch it to bridging mode (ask someone else
here about that, I don't have the modem).  On USB, windows (XP I assume) is
trying to connect the modem to the network, which may cause lots of
problems.  Let the router do everything, but having the same unit as you (I
took it off since it had problems with the Speedtouch USB), I don't remember
having to install any software for it.  Once the driver's were in, that was
it; it was supposed to just detect your cards and set up your network.  Try
to access the router's page...192.168.0.100? (check the manual).  That will
allow you to configure the settings of the router to get it to see
everything for you.  Try, try, try...I know it eventually works.
--
Joe W
--------------------------------------
'97 Wrangler Sport - Flame Red
- E-mail will not work...I can only be contacted through the newsgroup
"We have only two options: having fun or freaking out!" - JB
Technical Details
Message-ID: <mi5ja.16656$ln3.14952@fe08.atl2.webusenet.com>
Path: arc1-ca.pugleaf.net!archiver1.google.com!news1.google.com!newsfeed.stanford.edu!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!c03.atl99!news.webusenet.com!pc01.webusenet.com!fe08.atl2.webusenet.com.POSTED!not-for-mail
References: <33496fe3.0304031353.4744c417@posting.google.com>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 1122a6,e94b60e8707ea2df
X-Google-Attributes: gid1122a6,public
X-Google-Thread: 104fd2,e94b60e8707ea2df
X-Google-Attributes: gid104fd2,public
X-Google-ArrivalTime: 2003-04-03 17:36:33 PST
Path: arc1-ca.pugleaf.net!archiver1.google.com!news1.google.com!newsfeed.stanford.edu!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!c03.atl99!news.webusenet.com!pc01.webusenet.com!fe08.atl2.webusenet.com.POSTED!not-for-mail
From: "Joe W" <NOSPAM@NEVER!!.COM>
Newsgroups: alt.internet.wireless,bellsouth.net.support.adsl
References: <33496fe3.0304031353.4744c417@posting.google.com>
Subject: Re: Linksys software problem
Lines: 43
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
Message-ID: <mi5ja.16656$ln3.14952@fe08.atl2.webusenet.com>
X-Complaints-To: abuse@usenetserver.com
X-Abuse-Info: Please be sure to forward a copy of ALL headers
X-Abuse-Info: Otherwise we will be unable to process your complaint properly.
NNTP-Posting-Date: Thu, 03 Apr 2003 20:34:10 EST
Date: Thu, 3 Apr 2003 20:35:52 -0500