🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: alt.linux
Article #400

Getting cable internet to initialise correctly.....

#400
From: Matthew McKernan
Date: Tue, 19 Dec 2000 04:46
16 lines
2062 bytes
I have set up my NIC in Red Hat 7.0. That works fine. I am at a point where
I can type the following and I get access:

/sbin/dhcpcd -d -I coXXXXXX-a eth0

Where coXXXXXXX-a is my login ID.  That all works fine. Where I have the
problem is on bootup. During the boot though linux has a look at eth0 and
then after about 30 seconds it comes up as failed. So it doesn't connect to
the net at that point. In past linux set ups some how I managed to get it to
connect at that point. Suggestions?

As a temporary work around I just added the line above (/sbin/dhcpcd -d -I
coXXXXXX-a eth0) to the end of rc.d and that seems to do the trick for now.
I would prefer to have it set so that during boot when eht0 is checked it
can connect then. Doing it that way would also reduce boot times a fair
bit!!!
Technical Details
Message-ID: <tBB%5.161476$e5.127124@newsfeeds.bigpond.com>
Path: arc1-ca.pugleaf.net!supernews.google.com!sn-xit-03!supernews.com!news-xfer.nuri.net!newsfeed.dacom.co.kr!intgwlon.nntp.telstra.net!news-server.bigpond.net.au!intgwpad.nntp.telstra.net!newsfeeds.bigpond.com!not-for-mail

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 102983,2980bfef10f963e7,start
X-Google-Attributes: gid102983,public
X-Google-Thread: 100c5f,2980bfef10f963e7,start
X-Google-Attributes: gid100c5f,public
X-Google-Thread: f9b51,2980bfef10f963e7,start
X-Google-Attributes: gidf9b51,public
X-Google-ArrivalTime: 2000-12-18 20:50:03 PST
Path: arc1-ca.pugleaf.net!supernews.google.com!sn-xit-03!supernews.com!news-xfer.nuri.net!newsfeed.dacom.co.kr!intgwlon.nntp.telstra.net!news-server.bigpond.net.au!intgwpad.nntp.telstra.net!newsfeeds.bigpond.com!not-for-mail
From: "Matthew McKernan" <mckernan@optushome.com.au>
Newsgroups: alt.linux,aus.computers.linux,comp.os.linux.setup
Subject: Getting cable internet to initialise correctly.....
Lines: 18
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
Message-ID: <tBB%5.161476$e5.127124@newsfeeds.bigpond.com>
Date: Tue, 19 Dec 2000 15:46:12 +1100
NNTP-Posting-Host: 192.148.127.221
X-Trace: newsfeeds.bigpond.com 977200601 192.148.127.221 (Tue, 19 Dec 2000 15:36:41 EST)
NNTP-Posting-Date: Tue, 19 Dec 2000 15:36:41 EST
Organization: Telstra BigPond Internet Services (http://www.bigpond.com)