🚀 go-pugleaf

In <39b84fc7.1935262@news.adelaide.on.net> goble@gtech (David. E. Goble) writes:

]On 7 Sep 2000 07:49:25 GMT, vek@pharmnl.ohout.pharmapartners.nl (Villy
]Kruse) wrote:
]>
]>>Once connected  I try to ping the nameserver 230.48.5.1 or anyother ip
]>>and it just sits there doing nothing until I press ctr-c. Then it says
]>>it lost 100% packets... etc
]>>
]>
]>Try ping 203.48.5.2 instead 
]>
]Have, same result....
]>
]>These are all normal, and not releated to the problem.  If you look
]>further in the log you see you are connected with a remote and local
]>IP number.  The most likly cause is a missing default route through
]>the ppp0 interface.
]>
]Well when I type route -n it shows;

]Kernel IP routing table
]Destination Gateway Genmask Flags Metric Ref Use Iface
]203.48.5.2   0.0.0.0 255.255.255.255 UH  0  0  0 ppp0
]127.0.0.0    0.0.0.0 255.0.0.0       U   0  0  0 lo
]0.0.0.0      203.48.5.2 0.0.0.0      UG  0  0  0 ppp0

This is fine. You have a default route through ppp. Try the novj option
to pppd (put it into /etc/ppp/options). 
Sometimes broken VJ implimentations on the ISP can cause problems 
Befor you do so, see if you can get to some machine outside.
ping 142.103.234.11
say. It may be that your ISP has disabled pings to alltheir machines for
some reason.

]Does this help....


]--Regards       David. E. Goble
]             goble [AT] kin.net.au
]          http://www.kin.net.au/goble
]Po Box 648 Kingscote, Kangaroo Island, SA 5223