🚀 go-pugleaf

This is a multi-part message in MIME format.
--------------849AB5788ADAE0D92CA36C22
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I have a similar problem to WB's except in my case I have two printers: a HPIV
with ps capability and an Epson 640. The HP is in dos at lpt2 and the Epson is at
lpt1. In linux, the HP works ok pumping out postscript print jobs, but the Epson
doesn't. The conf.modules has three ports set up, two of which reflect the dos
settings along with the aliases. If I attempt to print to the Epson, the job just
causes the print queue to pulsate -- nothing is printed, yes, I'm using an
appropriate Ghostscript filter, etc. I'm using Red Hat 6.2; curiously, all this
worked back under 5.1!

Wally Brock wrote:

> Place the following line into your "/etc/conf.modules" file:
>
> alias parport_lowlevel parport_pc
>
> Good Luck,
>
> Wally
>
> Eric Wong wrote:
>
> > Help me please......
> >  i've just install RedHat linux 6.0 to act as a server in my office of 8
> > win98pc and 2 Macs, it works fine as a file server. But I hit a brick wall
> > when I tried to install an Epson Laser (EPL-5700L) printer.  I couldn't get
> > it work.  I look at the printtool section and couldn't find my printer on
> > the select list.
> >
> > The Question is how do I install the printer to act as network printer
> > amongs the pcs and the Macs??  Help is very much appreciated..
> >
> > Thanx you in advance
> >
> >  Regards
> >
> >  Eric
> > bbathk@hotmail.com

--------------849AB5788ADAE0D92CA36C22
Content-Type: text/x-vcard; charset=us-ascii;
 name="negush.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Edward T. Rewolinski
Content-Disposition: attachment;
 filename="negush.vcf"

begin:vcard 
n:Rewolinski;Edward
tel;fax:603.971.9550
tel;home:617.350.6078
x-mozilla-html:TRUE
adr:;;P. O. Box 96;Boston;MA;02117-0096;
version:2.1
email;internet:erewolinski@post.harvard.edu
fn:Edward Rewolinski
end:vcard

--------------849AB5788ADAE0D92CA36C22--