🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: alt.msdos.programmer
Article #1094

Re: "GP" Errors with BC 3.1

#1094
From: Brian C. Anderson
Date: Fri, 08 Jan 1993 15:11
41 lines
2896 bytes
|> 
|> In article <1993Jan6.214710.26976@schunix.uucp> sonix@schunix.uucp (Duane Morin) writes:
|> ... Stuff about GP errors deleted ...
|> >2) Got 3.1.  Can't even install the damn thing.  ZIPs are intermittently 
|> >	corrupted.  Little examination shows that, with cache memory off,
|> >	I have no problem unzipping, with it on, sometimes they get CRC
|> 
|> This is fair proof that your motherboard is not functioning in a happy way.
|> 486 motherboards are often very sensitive to the 5volt power supply voltage.
|> If the 5volt supply is running at the low end of tolerance, the cache
|> controller chips might not be able to function quickly enough.
|> 
|> Check to see that you have 5.00volts -0%, +5% on the motherboard's power
|> connector (red and black leads), when you have all of your system's
|> cards/disks installed.  If you aren't getting 5.00volts you should either
|> adjust your supply (HA HA HA, good luck!)  or get a new supply that does
|> give you 5.00volts.
|> 
|> You wouldn't have this problem if the motherboard suppliers wouldn't cheat.
|> What they do is buy all 25MHz 486 motherboards, without CPU or RAM.  They then
|> plug in the proper speed parts to get either 33MHz or 50MHz.  Well, this would
|> work, except that the motherboard manufacturer's grade the motherboards for
|> speed.  The ones that fail 50MHz become 33MHz boards, the ones that fail
|> 33MHz become 25MHz...
|> 
|> Now, you ask, "Why does the board work sometimes on my system?"
|> 
|> Well, It's like this, the boards are designed to run at 5v +/- 5%, and from
|> 0-70degrees C.  Logic chips such as the cache controller run their fastest
|> when they are cold and at the high voltage margin, and at their slowest when
|> they are hot, and at their low voltage margin.  Most of the time, the power
|> supplies will provide 5.0v on the nose, and you all will run your machines
|> in comfortable rooms, so you can get away with using parts that failed to
|> run full speed at 4.75v and 70C.  The clone builders are banking on this
|> happy coincedence.
|> 
|> Chuck Harris - WA3UQV
|> chuck@eng.umd.edu
|> 
|> 
Technical Details
Message-ID: <C0JJJI.8JI@fs7.ece.cmu.edu>
Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!qt.cs.utexas.edu!yale.edu!spool.mu.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!news.sei.cmu.edu!fs7.ece.cmu.edu!packard.ece.cmu.edu!bca
References: <1993Jan6.214710.26976@schunix.uucp> <1993Jan07.201120.9951@eng.umd.edu>

Show Full Headers
Complete Article Headers
Newsgroups: alt.msdos.programmer,comp.os.msdos.programmer
Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!qt.cs.utexas.edu!yale.edu!spool.mu.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!news.sei.cmu.edu!fs7.ece.cmu.edu!packard.ece.cmu.edu!bca
From: bca@packard.ece.cmu.edu (Brian C. Anderson)
Subject: Re: "GP" Errors with BC 3.1
Message-ID: <C0JJJI.8JI@fs7.ece.cmu.edu>
Originator: bca@packard.ece.cmu.edu
Sender: news@fs7.ece.cmu.edu (USENET News System)
Reply-To: bca@packard.ece.cmu.edu (Brian C. Anderson)
Organization: Electrical and Computer Engineering, Carnegie Mellon
References: <1993Jan6.214710.26976@schunix.uucp> <1993Jan07.201120.9951@eng.umd.edu>
Distribution: usa
Date: Fri, 8 Jan 1993 15:11:41 GMT
Lines: 41