🚀 go-pugleaf

I am not very sure of how raster graphics works.    I believe the character
is drawn up on a eight
by eight or more raster or perhaps less, e.g.:

128          x                 x             sum(1 to 128) = 256dec = FFh
64            x                 x              16 + 8 = 24dec = 18h
32            x                 x
16            x x x x x x x x
   8            x x x x x x x x             this would then produce a eight
digit number: 256,
   4            x                 x           24,24,24,24,24,24,256 by
adding the relative numbers
   2            x                 x             together for each column.
Would I then be
   1            x                 x             required to send (all in
hex):

"1b 2a 62 8 57 FF 18 18 18 18 18 18 FF" to the printer to print this H
character ?
    Have I got it right ?

To reply remove the numeral before the @ in my e-mail address


Christoph Merten wrote in message <3AB06DAA.9A4B65A1@gruppenhaus.de>...
>IOL-News schrieb:
>
>> How do I upload the font myself. Did get to see some useful information
at
>> the HP site about the EURO symbol.But not sure if it will work in DOS.
>
>You can easily send the symbol as a PCL  raster graphic [1b 2a 62 #...# 57
>data]. #...# = number of bytes
>you want to upload as data.
>
>or you can change the character code of a special character: [1b 2a 63
#...#
>45]. #...# = character code.
>then you upload the data for this character code: [1b 28 73 #...# 57 data]
>#...# = number of bytes and
>then the data.
>
>hope this helps
>
>ciao chris