🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: alt.os.linux.best
2 messages
2 total messages Started by Nils Kramar Sun, 01 Apr 2001 16:56
problem with computer - A-20 gate
#8
Author: Nils Kramar
Date: Sun, 01 Apr 2001 16:56
7 lines
1639 bytes
whenever I turn on my (old) PC and Windows is about to be started, the
process stops and the machine tells me there is a problem with the
A-20 gate, and the XMS-driver would not be installed. The same thing happens
whenever I try to start the PC from boot-disc. Afterwords the DOS-prompt is
shown, but sometimes I'm unable to type; the keyboard appears not to be
recognized in that case. I already checked the RAM - it works properly. Can
somebody give me advice what to do?
Re: problem with computer - A-20 gate
#9
Author: Peter Hayes
Date: Fri, 06 Apr 2001 13:13
24 lines
2161 bytes
On Sun, 1 Apr 2001 18:56:01 +0200, "Nils Kramar" <nils@kramar.de> wrote:

> whenever I turn on my (old) PC and Windows is about to be started, the
> process stops and the machine tells me there is a problem with the
> A-20 gate, and the XMS-driver would not be installed. The same thing happens
> whenever I try to start the PC from boot-disc. Afterwords the DOS-prompt is
> shown, but sometimes I'm unable to type; the keyboard appears not to be
> recognized in that case. I already checked the RAM - it works properly. Can
> somebody give me advice what to do?

I suspect  you have a card or a chip that's not seated in its slot
properly. Either that or try another keyboard, or try removing any hardware
you can temporarily do without until you find the culprit.

Does it happen only when booting from another OS? That happened to me. The
problem went away after a while and I never did find out the cause.

Try asking in a Dos/Wndoze newsgroup - dos problems aren't really anything
to do with Linux...

Peter
-- 

The past is almost as mysterious as the future.
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads