🚀 go-pugleaf

I am having a printing problem with Caldera Linux Base 1.1.  I can't 
get an IBM Lexmark (driver HPLJ) or an HPLJ5L (driver HPLJ4) to print
with a half inch margin on the top of every page.  The first page does
it, then the rest print about 1/4" from the top.  After the first page
prints, the subsequent pages are missing the first line.  How do I fix
this?  I'm using a 486-50.  The printer is connected to a parallel
port.  The lpd.conf file indicates binary file type "L".  I tried to 
use "pr" in the /var/spool/lpd/ps/filter file and that resulted in lpq
error msgs.  Please help.  The addcr just adds a ^M to the end of each
line.

Here is what the filter file looks like:
----------------------------------------
#!/bin/sh

DEVICE=ljet4
RESOLUTION=300x300
PAPERSIZE=letter
SENDEOF=

(printf "\r"; cat - | sed -f addcr; cat - | pr -F -l 60 -t; printf "\r\f")
2>&1

if [ "$PAPERSIZE" = "a4" ]; then
  T=A4
else
  T=US
fi

nenscript -T$T -ZB -p- |
if [ "$DEVICE" = "PostScript" ]; then
	cat -
else
	gs -q -sDEVICE=$DEVICE \
		-r$RESOLUTION \
		-sPAPERSIZE=$PAPERSIZE \
		-dNOPAUSE \
		-dSAFER \
		-sOutputFile=- -
fi

if [ "$SENDEOF" != "" ]; then
	printf "\004"
fi

EXIt 0
----------------------------------------
Here is what the printcap looks like:
----------------------------------------
##PRINTTOOL## LOCAL ljet4 300x300 letter {}
ps:\
        :sd=/var/spool/lpd/ps:\
        :mx#0:\
	:pl#60:\
        :lp=/dev/lp1:\
        :if=/var/spool/lpd/ps/filter:\
        :sh:
##PRINTTOOL## LOCAL
lp:\
	:sd=/var/spool/lpd/lp:\
	:mx#0:\
	:pl#60:\
	:lp=/dev/lp1:\
        :if=/var/spool/lpd/ps/filter:\
	:sh:

I hope this is enough information to help in solving this problem.